0%

0%

Maxim Grigoryev

Radio engineer and entrepreneur

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 07/18/2019.

My Projects

We are the electronics designer team with science background and at free time was prepare some IoT devices with new features.

High-performance IoT devices with low cost BOM

Maxim Grigoryev

Projects I Like & Follow

While you could use a WiFi shield, or one of the many, many, ESP8266-equipped 'duinos out there, why not just make your USB cable WIRELESS?

Wireless USB for Instant IoT

Creating a break-out board for the ATtiny1616 where sketches can be uploaded from Arduino with the Arduino UNO or a modified AVR JTAG ICE

ATtiny 1-series with Arduino support

Sander van de Bor

The 2016 Hackaday Prize

tracking CubeSats faster, anywhere and anytime for everybody!

The Distributed Ground Station Network

The 2016 Hackaday Prize

Use your lasercutter to make an optics bench.

Lasercut Optics Bench

The 2017 Hackaday Prize

Sub 1GHZ RF wireless modules operating at 915MHZ and 433MHZ ISM bands, based on the ADF7023, full open source!

S1G RF: Sub 1GHZ Radio Modules 915MHZ and 433MHZ

The 2018 Hackaday Prize

Musical Project that converts low frequency waves from the magnetosphere into sound.

Natural Radio Music

A software interface for the breadboard. Configures your prototypes without wires or other components.

The MetaBoard

The 2017 Hackaday Prize

Say hello to Quattro, a fully functional,non lethal Arduino quadruped robot!

QUATTRO - The Arduino Quadruped

Universal Arduino Wireless Shield

RadioShield

6.5' white tree with 250 WS2811 RGB LEDs, driven by an ESP8266 microcontroller using the FastLED library, controlled with a web app and IR.

Wi-Fi RGB LED Christmas Tree

The 2016 Hackaday Prize

Qubie is a small wireless device that measures waiting time at a polling place for the benefit of both election jurisdictions and citizens.

Qubie

The 2016 Hackaday Prize

Quoting Einstein "If the bee disappeared off the surface of the globe then man would only have four years of life left.

Save the bees save the planet - IoT hive platform

This project has an esp8266 giving Wi-Fi functionality, LoRa module, 1.8 inch TFT display and buttons. You can make LoRa Remote or messenger

LoRa Remote Control Messenger With a 1.8" TFT

akarshagarwal98

FM radio with SI4703 and Arduino. Android app as "remote control" bluetooth controlled

FM radio with android remote control

Successfully authenticate IBM Watson IoT Cloud with the STMicro Nucleo with MEMS gyro, accelerometer, magnetometer, temp, pressure sensors.

IBM Watson IoT Cloud Authentication w STM32 Nucleo

Control and operation for remote telescope's support devices

Remote Telescope Appliance

A HopeRF RFM69HW experimenters board for the Raspberry PI. Intended for UKHASnet experiments.

UKHASnet-Pi

This is a small line follower with PD control, made from RC helicopter frames

Small race competition line follower

View all

Bits