0%

0%

Tim Ansell

Open source hardware hacker.

Sydney, Australia

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 09/21/2015.

My Projects

An open platform for recording, routing, and manipulating HDMI and DisplayPort video signals.

Numato Opsis: FPGA-based open video platform

The HDMI2USB project develops open hardware to record and stream HD videos (from HDMI & DisplayPort sources) for conferences and usergroups.

HDMI2USB.tv Open video capture hardware + firmware

Projects I Contribute To

A programming and communication interface for FPGAs

FPGA Helper

Projects I Like & Follow

The 2016 Hackaday Prize

My attempt at making an FPGA experimenters board in a popular form factor :)

'Flea Ohm' FPGA Project

Valentin Angelovski

The CAT Board is part of a Raspberry Pi-based hand-held FPGA programming system.

CAT Board

Dave Vandenbout

The 2018 Hackaday Prize

Itsy-chipsy is a chip platform that enables a multi-block service like-oshpark capable to offer area for your own chip, for as low as $100.

Itsy-Chipsy: Make your own $100 chip

ice40 FPGA based custom board to control eink display

FPGA eink controller

Just for the sake of making it happen, I've designed an open-source TOMU form factor ESP32 design. It fits in a USB Type-A port.

FEMU - An ESP32 Wi-Fi/Bluetooth board in TOMU form

Hackaday Prize 2019

University digital Logic Learning Xtensible board release 3 with SDRAM

ULX3S powerful ECP5 board for open source FPGA

BlackIce is the fusion of FPGA & ARM - a low cost open source hardware FPGA dev board bound together with innovative open source toolchain

BlackIce - Low Cost Open Hardware FPGA Dev Board

The 2016 Hackaday Prize

ARM. FPGA. 180 reconfigurable I/O. Wi-Fi. Bluetooth. BLE. Starts at $95.

snickerdoodle

Bussines Card with PC interface via Micro USB Type B PCB connector that acts like a gamepad. USB connectors for FREE!!!

Business Card Gamepad

The 2017 Hackaday Prize

A dirt cheap open hardware USB-JTAG board designed to program TinyFPGA A1 and A2 boards.

TinyFPGA Programmer

The 2016 Hackaday Prize

An open source FPGA implementation.

Open Source FPGA

Hackaday Prize 2019

Defining and implementing a bus protocol that is built around low-cost FPGAs to enable modular and affordable control and DAQ systems.

FBus: Open FPGA Realtime Bus

HDMI CEC to USB Keyboard adapter

CEC2Usb

The 2016 Hackaday Prize

A 3D Graphics Accelerator for FPGAs

QuickSilver Neo: Open Source GPU

Ruud Schellekens

TIL305 remake with SMD LEDs. 0402 and 0201 SMD LED Versions

reDOT

A one-page CPU: spec, HDL, emulator and macro assembler each in one page. Fits in XC9572 CPLD.

OPC-1 CPU for CPLD

SpinalHDL is an alternative hardware description language designed to provide many features that are missing in VHDL and in Verilog.

SpinalHDL

A programming and communication interface for FPGAs

FPGA Helper

View all

Bits

Ed S wrote 10/31/2017 at 16:18

Thanks for liking our #OPC-1 CPU for CPLD project!

Are you sure? yes | no