Close
0%
0%

Brian Cornell

Electronics enthusiast with an interest in power management.

Following
Send a private message
Similar accounts worth following
11 Followers
18 Following
26 Projects
122 Likes
brian-cornell
Send a private message

This user joined on 02/10/2018.

9.2k
43
3
27
Functional design revision of the prototype TS350.
Project Owner Contributor

350 Watt True Sine Inverter

Brian CornellBrian Cornell

1.2k
19
2
19
Charge a battery via PV to safely run a pump or other load.
Project Owner Contributor

Rain Barrel Pump

Brian CornellBrian Cornell

2.1k
24
0
15
350 Watt inverter that converts 12VDC to 120VAC @ 60Hz.
Project Owner Contributor

TS350 True Sine Inverter

Brian CornellBrian Cornell

1.1k
565
4
8
Silly simple GPIB console for U/Linux & Mac OS
Project Owner Contributor

GPIB Instrument Control Console

Brian CornellBrian Cornell

2.8k
8
2
7
Charger & Bidirectional Balancer for 48V Lead Acid Battery Stack
Project Owner Contributor

Solar Charger & Balancer for Lead Acid Stacks

Brian CornellBrian Cornell

1.2k
7
0
7
50 Watt proof of concept inverter converts 12VDC to 110VAC @ 60Hz.
Project Owner Contributor

TS50 True Sine Inverter

Brian CornellBrian Cornell

View all 26 projects

134.6k
1k
53
854
High Power, High Performance 400V 300A 100+kW Motor Controller fully compatible with VESC®
Project Owner Contributor

Axiom: 100+kW Motor Controller

MarcosMarcos

56k
983
131
355
Soldering pen for Weller RT tips with OLED display
Project Owner Contributor

RT Soldering pen

vlkvlk

41.9k
829
9
26
A compact, battery powered IOT multi sensor module with wifi & MQTT support. Feat. temperature, humiditity, lux, air pressure, PIR & more
Project Owner Contributor

ESPmobe - battery powered ESP32 IoT-sensor

MichaelMichael

28k
92
34
85
A DIY oscilloscope probe to dig small differential signals embedded in high common mode voltages.
Project Owner Contributor

A 10X 100MHz Differential Probe

Bud BennettBud Bennett

15.4k
92
12
55
Can we get fruit trees to report to us when their fruit is ripe?
Project Owner Contributor

Electronic nose to detect fruit ripening

CraigCraig

6.2k
107
9
75
A time-domain reflectometer add-on for your scope
Project Owner Contributor

Tiny TDR

Ted YapoTed Yapo

4.8k
33
20
40
A Cheap Disposable PPE Device for low to moderate risk areas
Project Owner Contributor

ShockBIT

John LoefflerJohn Loeffler

4.2k
40
15
38
Feature-packed over-discharge protection. Set the cell-count, minimum cell voltage and dip-time below threshold. Fully hackable!
Project Owner Contributor

Universal undervoltage lockout up to 34V input

JanJan

3.4k
12
10
18
Candy in a 35mm film container is launched towards a trick-or-treater when they step on a foot pedal 50 feet away from the launcher.
Project Owner Contributor

Halloween Candy Mortar

Paul McCabePaul McCabe

2.9k
33
1
27
A set-and-forget I2C/digital datalogger. Size: 25.3x 18x 10mm incl. battery. Runtime: > 1year
Project Owner Contributor

micropower micrologger [mPmL]

JanJan

2.5k
41
8
49
With a current consumption of only few uA, this thermometer is capable of running for years from single CR2032 (and forever from solar cell)
Project Owner Contributor

Ultra Low Power thermometer

Miroslav HancarMiroslav Hancar

1.9k
652
3
13
Integrated AHRS and sensing platform for gliders and GA aircraft with Bluetooth interface
Project Owner Contributor

AHRS platform for gliders

Marian KellerMarian Keller

1.6k
443
0
7
Re-purposing aircraft headsets for gaming and reducing noise distractions in the office. A future upgrade may enable it's use during DIY.
Project Owner Contributor

Open Source Comfortable Headsets

JoniJoni

1.3k
4
2
6
A Jet Pulse Controller board designed for industrial dust collectors
Project Owner Contributor

Jet Pulse Controller

setCREATEsetCREATE

  • Tindie
697
698
2
17
Tindie will be sniffing out the best badges and awesome hardware in Vegas 27-30 July 2017. Come join us!
Project Owner Contributor

HARDWARE HUNTING AT DEF CON 25

TindieTindie

358
4
2
8
A experiment in having a looser hold time that became a tour of power electronics, Nixie tubes, and industrial design
Project Owner Contributor

Leave Time Behind

James WilsonJames Wilson

309
309
0
7
Advanced Open Source MicroEnvironmental Control System
Project Owner Contributor

Enviclo

Daniyal AnsariDaniyal Ansari

303
303
0
2
User friendly environment for filament changes using gcodes in 3D printers with 1 extruder.
Project Owner Contributor

Filament Changer for Marlin 3D printers GUI

Luis DiazLuis Diaz

View all

Share this profile

Share

Bits

Send a private message to Brian Cornell

Become cool instantly

Create your Hackaday.io profile like Brian Cornell and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2023 Hackaday

Report user as inappropriate

You are about to report the user "Brian Cornell", please tell us the reason.