Close
0%
0%

praveen.kumar

Following
Send a private message
Similar accounts worth following
4 Followers
35 Following
1 Projects
praveenkumar
Send a private message

This user joined on 02/28/2018.

26
0
15
An Intelligent Plug-and-Play Motor Controller to Control 2 Brushed DC Motors upto 5A
Project Owner Contributor

5A - 40V Dual Brushed Motor Controller

praveenkumarpraveen.kumar

104.5k
1,496.5k
75
2.4k
Follow for the 'Hacklet' and latest news about hackaday.io
Project Owner Contributor

Hackaday.io Project

lutetiumLutetium

47.5k
995
35
135
It can power the Raspberry Pi Zero over Ethernet. The board also adds an Ethernet Phy to the Raspberry Pi Zero to give you full Ethernet
Project Owner Contributor

PoEPi: Pi Zero Power over Ethernet with PHY

julienjulien

20.5k
11.7k
0
34
Voice controlled home automation and personal cloud using a Raspberry Pi
Project Owner Contributor

RaspBox - Home Automation & Cloud

rodolphehRodolpheH

12.6k
7.1k
0
38
DIY DLP 3D Printer based on NanoDLP Software using Raspberry Pi 3 and Trinamic Motor Controller
Project Owner Contributor

ADAM DLP 3D Printer

adambrxadambrx

8.7k
3.2k
0
10
How I added a 500W heater to my 3D printer to enable reliable ABS printing.
Project Owner Contributor

Enclosure Heater for 3D Printer

mark-rehorstMark Rehorst

8.3k
4.5k
0
14
NodeUSB is a tiny, low cost $9, WiFi ready, ESP8266 USB dev kit for Internet of things, it comes with NodeMCU pre-installed
Project Owner Contributor

NodeUSB- ‘Eat your own dog food’ WiFi IoT DevKit

michael-wenMichael Wen

5.1k
5.1k
0
7
A 7 segment display Arduino clock with RTC, alarm and brightness control.
Project Owner Contributor

Yet Another Arduino Clock

neoNeo

4.7k
2.1k
2
59
A set of Eurorack modules to control synths, make custom MIDI-compatible interfaces and USB audio, powered by Teensy 3.6
Project Owner Contributor

MAD - Modular Audio Devices

michele-perlaMichele Perla

3.9k
2.4k
0
9
Rock solid mount that allows the bed to expand when heated.
Project Owner Contributor

Kinematic Mount for 3D Printer Bed

mark-rehorstMark Rehorst

3.8k
3.8k
1
10
How to build RC Car with the esp8266
Project Owner Contributor

Remote Control Car via WIFI

divdiv

3.7k
2.8k
2
16
Arduino shield (will work standalone also) which would print on a thermal paper. Serial, USB and Ethernet communication, open source.
Project Owner Contributor

IoT thermal grayscale printer shield

lukasziwaszkiewiczlukasz.iwaszkiewicz

3.3k
3.3k
0
8
The Arduino Bluetooth Smart Car has the function of Complete tracking, obstacle avoidance, infrared remote control and so on.
Project Owner Contributor

Installation of Bluetooth MultiFunction Smart Car

icstationicstation

3.1k
3.2k
2
10
A small device to turn one IR remote control's power signal into another's.
Project Owner Contributor

Remote Control Translator

clara-hobbsClara Hobbs

3k
3.1k
3
26
Enable phone and web app control of 16 station sprinkler, internal lighting, household appliances, at my vacation home.
Project Owner Contributor

Particle Photon Home Automation

joe-menardJoe Menard

2.6k
2.6k
10
19
A 3D Printing desktop arm that can write and draw!!!
Project Owner Contributor

DARM

liaoqiayuanliaoqiayuan

2.4k
2.5k
2
19
2007 - my first extensive project
Project Owner Contributor

Bluetooth RC Car

gertlexGertlex

1.6k
1.8k
0
7
A small and subtle HMD using Bluetooth to connect to a nearby RasPi.
Project Owner Contributor

Bluetooth Raspberry Pi HMD

josephvossjosephvoss

1.5k
1.5k
2
24
WobbleWonder is a full-on Virtual reality experience using the Oculus Rift and a smart phone's accelerometer! (v1 was Wobble Wobble)
Project Owner Contributor

WobbleWonder

sophi-kravitzSophi Kravitz

View all

Share this profile

Share

Bits

Send a private message to praveen.kumar

Become cool instantly

Create your Hackaday.io profile like praveen.kumar and many others

Report user as inappropriate

You are about to report the user "praveen.kumar", please tell us the reason.