Projects AlonChen likes and follows

Sort by:

oshpark

Wristwatch form-factor conference badge

Open Hardware Summit 2020 badge

oshpark oshpark

How to share a USB key and make a backup of a Dongle?

Share a USB dongle - Software Solution

Yet another homebrew computer based on 65C02 CPU

DB6502

How you can get multi-connect and remote access to USB Dongle

Donglify - Share USB Key Software

Building a set of controllers for Kerbal Space Program including attitude, translation, throttle and hotkey inputs

KSP Controller Hardware

A project to design, build and fly a 3D printed high power model rocket air-frame, capable of flying with up to a K Class motor.

Fully 3D Printed Level 1-2 NAR Cert Rocket

Mitchell O'Connor

Simulator for the VT100 hardware. Running inside Gardi's 3D model.

VT100 simulator and 3D printed replica

2021 Hackaday Prize

An electric scooter that can be made entirely from printed parts and off the shelf components without any power tools!

RepRaTS 3D Printable E-Scooter

An OS boot selector switch based on the Pimorini Tiny 2040

Tiny 2040 Hardware Boot Switch

2021 Hackaday Prize

3D LED cylinder - remix of makeTVee

3D LED cylinder - remix of makeTVee

This post explains how to control a Nikon D3100 DSLR, and then get the images off of it.

Remote control and image retrieval from Nikon DSLR

sciencedude1990

Using natural selection as an optimizer for training neural networks

Neuroevolution From Scratch

Gonçalo Nespral

Samples all 6 metrics the EPA uses to calculate Air Quality Index: 2.5 & 10um particulates, O3, CO, NO2, and SO2, and calculates AQI.

A More Complete Air Quality Monitor

This is a 3d printing modular pulley system.Total mechanical advantage is 8:1. So, we can lift a mass of 80 kg with a 10 kg pulling force.

3D Print High Strength Pulley System(Block&Tackle)

2021 Hackaday Prize

Using the highest power germicidal LEDs currently available, paired with lithium ion batteries in a portable footprint.

Handheld UVC LED disinfector

Simple design of a medical shield for COVID-19 protection that fit on A4 sheet size.

Laser cut medical shield on A4 sheet

Hackaday Prize 2020

This is a anti face touch alarm cap that doesnt allows to touch your face.. this is a trainer cap to not to touch our face!!!

The Cap That Doesn't Let You Touch Your Face!!!

The Open Source Respirator is a unique prototype respirator that utilizes swap-able filters.

OS Respirator

Stuck at home away from your loved one? This fun little project will definitely try to bring a smile to your faces.

IoT Notifier

Within less than 15 minutes build a smart Raspberry Pi based Smart Home Environment Sensing and Humidification device.

Tuya Link SDK IoT Smart Environment Sensing

This example is showing how to control a GPIO pin on a RaspberryPi remotely from a smart phone (or another BleuIO Dongle).

Raspberry Pi based Home Automation