0%

0%

Rait Rääk

Software Engineer

Melbourne

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 01/20/2016.

My Projects

RFStamp is a small form factor SAMR21G18 Radio Module Hardware project.

RFStamp

rait-rk Rait Rääk

Projects I Like & Follow

Arduino UNO based GPS navigation system. Total cost below $25. It has 320*240 TFT showing the actual position on a map.

Real simple and cheap GPS navigation

The 2015 Hackaday Prize

Fully automated remote control and monitoring of agricultural growing systems

Teleimperium

evan-salazar Evan Salazar

Diyouware TwinTeeth is a open-source PCB mini-factory targeted to the electronic hobbyists.

TwinTeeth: The PCB mini-factory

Thought you'd seen enough Pi Zero USB hubs? You're Right!3-port USB hub, 12 V power in (2A capacity), and audio output for the Pi Zero

Yet Another Pi Zero USB Hub

TinyESP is a tiny size breadboard adapter for ESP-12/ESP-07 ESP8266 WiFi module. It contains a 3.3V voltage LDO, a Reset button and a flash

TinyESP ESP8266 Breadboard Adapter

The 2015 Hackaday Prize

The PhotonHome is the next step in bringing the Photon environment to AC powered applications

PhotonHome - AC Power IoT Homebase

The 2015 Hackaday Prize

Preterm infants come in lots of different sizes. Nasal CPAP cannula come in few sizes. Read on to see if we can 3D print a solution.

Individualised nasal CPAP cannula for preterm kids

ben-hartmann Ben Hartmann

Light CarPC-like Project to integrate the open source software NavIt into a Navigation System from Volkswagen

NavIt on a VW OEM Navigation System

robert-pohlink Robert Pohlink

Build your IoT in couple of minutes

EasyIoT Cloud

easyiot EasyIoT

The 2015 Hackaday Prize

Teensy v3.1 - FrSky Smart Port Sensor Shield with addressable led output and telemetry port

Teensy v3.1 - FrSky S.Port & WS28xx Led Shield

charles-lakins Charles Lakins

Using a RepRap 3D printer to manufacture functional propellers for UAVs.

3D-Printable Propeller

Hackable wifi enabled modular LED display to showcase messages that matter to makers, hobbyists and everyone else!

Starling: A modular internet connected LED display

sandeep-patil Sandeep Patil

This is a lowcost rf module designed to link sensors etc to a home automation setup..

Yet another Home Automation Wireless Doodad!

The Bridge Shield is a board for Students, Hackers & Researchers which can use along with Pi or Arduino Uno or both to create unimaginable

Robot Using Raspberry Pi & "Bridge Shield"

Processorless simulation model combines with Arduino in prototyping cheap automation. Send a back-to-back-retriggerable-monostable to work.

Project Proto

c-prichard C. Prichard

The Crawli is super-simple, super-tiny, single-input soft robot that can crawl.

Crawli - A Simple Crawling Soft Robot

aidan-leitch Aidan Leitch

A simple 4x4x4 LED cube using Arduino or any other board/MCU/CPU

LED Cube

oleksandr-bogomaz Oleksandr Bogomaz

juste a simple AVR dev board

AVR - ATMEGA32/1280 development board

zanzeoo zanzeoo

View all

Bits