0%

0%

Jakob

Rupitz

Austria

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 04/19/2021.

Projects I Like & Follow

Adding a "real" lens to Fujifilm's first (and only) analog square format instant camera.

Instax SQ6 Lens Transplant

kevin-kadooka Kevin Kadooka

The 2017 Hackaday Prize

An open, superior, low cost alternative to FDM 3D printing that takes advantage of high res LCD technology and modern curable resins.

Low Cost, Open Source, LCD based SLA 3D Printer

Mostly 3D printer Rasppberry Pi 3D Scanner Rig

Raspberry Pi Zero 3D Scanner

vojislav-milanovic Vojislav Milanovic

A simple point-and-shoot near-IR camcorder built with a raspberry pi

Near-IR Camcorder with a Raspberry Pi

How to power up and communicate with the cheap RCWL-0516 radar sensor module

First steps with the RCWL 0516 radar switch

Focused on making clear every building step with helpful links and tips for total noobs (like me) who wants to get started with drones

My first copter build with RPi2 and Emlid Navio2

dmitriy Dmitriy

Takes 3D surface scans at close range. It is simple to construct as it uses off the shelf hardware and software.

3D scanner

Hackaday Prize 2019

Loko is the 12 gram GPS tracker with extreme battery life.

Loko-the Tiniest GPS tracker with 270 days battery

akio-sato Akio Sato

BlackIce is the fusion of FPGA & ARM - a low cost open source hardware FPGA dev board bound together with innovative open source toolchain

BlackIce - Low Cost Open Hardware FPGA Dev Board

Add a second brain to your Arduino Mega

RetroShield for Arduino Mega

The 2017 Hackaday Prize

Challenging myself to be healthier! Having fun while I'm at it!

21 Days - IoT Habit Forming Picture Frame

chris-gervang Chris Gervang

Create a 1971 VertiBird toy with a modern TWIST!

VertiBird Redo

luke-j-barker Luke J. Barker

The 2018 Hackaday Prize

Do you want a drone ready to be in the air 24 hours/day, 7 days/week? We're propossing this automatized drone supercharger. Go up darling!!!

Drone Supercharger

frasanz frasanz

A 3D printed drone with an added pusher motor

3D Printable VTOL EDF Jet

harry-gao Harry Gao

ModbusBox has embedded setup web-page. Yo do not require to program anything to connect any modbus RTU device to MQTT.

IOT ModbusBox

Hackaday Prize 2020

This project demonstrates how to build a battery powered IoT Wi-Fi button in less than 10 min. This example controls HUE lights over IFTTT.

WiFi Button

Create a home automation gateway, you can access from anywhere, using a Raspberry PI, Sonoff switches with Tasmota and FlashLex.

Internet Accessible Home Automation with Sonoff

clay-graham Clay Graham

This article will explain how to create a BLE Repeater using BLE USB dongle called BleuIO and its python

Create a simple Bluetooth repeater using python

View all

Bits