0%

0%

Scott

mechanical engineer, electronics tinkerer

Austin, Texas

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 07/15/2014.

Projects I Like & Follow

The 2016 Hackaday Prize

LiFePO4 battery / UPS / power manager for Raspberry Pi

LiFePO4wered/Pi

Patrick Van Oosterwijck

Hackaday Prize 2020

Mostly 3D printed HAWT windturbine incl. 3D printed disk-generator and brake system.

WinDIY - HAWT Wind turbine

The 2016 Hackaday Prize

A smart sensor Node to trigger an action on a smartphone each time a physical change is detected (temperature, displacement, click...)

Triggy - Sensor Node for Life Automation

The 2017 Hackaday Prize

A safety glasses with a bluetooth enabled head mounted oled Display, to diplay data from your measuring device right into your view field.

Safety Glasses With B.T. Display for Multimeter

The 2018 Hackaday Prize

A deployable power plant that eats trash and turns it into energy, electricity, fuel, and eventually very nearly anything else.

Metabolizer - A recycling center powered by trash!

The 2018 Hackaday Prize

Measures wind speed via inertial sensors and rain with capacitive. Maintenance free, LPWAN, 3D printed (Not yet another AWS)

Weather Pyramid

Manolis Nikiforakis

The 2017 Hackaday Prize

The world's smallest fully automatic whiskey still built with safety as the foremost consideration.

The NanoStillery™ - Whiskey Distillery

Tegwyn☠Twmffat

The 2017 Hackaday Prize

Sub 1GHZ RF wireless modules operating at 915MHZ and 433MHZ ISM bands, based on the ADF7023, full open source!

S1G RF: Sub 1GHZ Radio Modules 915MHZ and 433MHZ

AVR (lordKiCAD)

The 2017 Hackaday Prize

Monitor and control hydroponic garden using IUT.

Hydroponic Garden Control with IUT

A tiny, Arduino compatible, control board for WS2812B RGB LED strips that can be soldered directly on to the pads at the end of the strip.

ChromaTab

The 2018 Hackaday Prize

Radio killed the Video-recorder Star

RRB - The Radio Rewind Button

A small DRO for the lathe that doesn't take up too much space

Mini DRO for lathe

What does one do when designing a power supply? Well, build a power supply tester, of course.

PSU Burner

Let's observe an emerging beehive throughout the year 2018! (And create an logger from scratch for that purpose)

µPower (beehive) SD logger

The 2016 Hackaday Prize

An open solution enabling everone to build and maintain a IoT enabled sensor network. BeeStalker is the reference for you project!

CM3 Board + Backend-Library + Bee Hive Monitor

The 2017 Hackaday Prize

SCOUT is a micro UAS with decent flight time, speed, and technical capability. Designed for Search and Rescue Operation Assistance.

SCOUT - Smallest fully featured folding quadcopter

Converting an Ocean Reef Snorkel Mark into emergency PPE.

Ocean Reef Snorkel Face Mask, Emergency PPE

The 2017 Hackaday Prize

A battery powered Raspberry Pi3 with 7 USB ports, 6 holders for 18650 batteries and some useful accessories

BeeStalker UsbLog

View all

Bits

Patrick Van Oosterwijck wrote 09/21/2017 at 14:31

Hello Scott, thank you for following my #LiFePO4wered/Pi project! If you're interested you can also follow my next gen #LiFePO4wered/Pi+ project where most new development will take place. :)

Are you sure? yes | no

AVR (lordKiCAD) wrote 05/19/2015 at 19:23

Thanks for following my HydroPWNics project!

Are you sure? yes | no