0%

0%

Nate Weber

3rd generation geek. Finally learning to solder and getting into hardware and building.

Following Follow me

Similar accounts worth following

This user joined on 06/11/2020.

Projects I Like & Follow

Just for the sake of making it happen, I've designed an open-source TOMU form factor ESP32 design. It fits in a USB Type-A port.

FEMU - An ESP32 Wi-Fi/Bluetooth board in TOMU form

Run Stremio on Raspberry Pi with a kiosk look

Install Stremio on Raspberry Pi

Hackaday Prize 2019

URU Key - a biometric FIDO2 Authenticator built with ESP32 / ATECC508A / FPC1020

URU Key

andrey-ovcharov Andrey Ovcharov

oshpark

Wristwatch form-factor conference badge

Open Hardware Summit 2020 badge

oshpark oshpark

Hackaday Prize 2019

FiberGrid is a sensor framework for robotics

FiberGrid

The pyEC is a pyBoard compatible multipurpose board capable of talking with just about anything on your E-bike.

pyEC, a pyBoard Compatible E-Bike

brian-barrett Brian Barrett

Hackaday Prize 2019

The intent behind the Ultra Servo is to give a maker or a robotics a powerful building block.

Ultra Servo V2.0

syncBlink is a wireless connected mesh of LED nodes which are synchronously reacting to music/sound. Using a EEPROM cartridge for scripting.

syncBlink (formerly known as muRLi)

RT-X

Hackaday Prize 2020

We show how you can easily build a battery powered Wi-Fi Door sensor and send notifications to your phone without coding and programming.

Wi-Fi door sensor, powered on batteries

din rail enclosure to mount the RPI4 on a cabinet

Raspberry Pi 4B din rail enclosure

This project is for making infrared thermometer with Arduino, the circuit is put in MDF case look-liked a medical infrared thermometer

Arduino Infrared Thermometer Gun with MDF Case

The main goal of this project is to design a Voice-Controlled Home Automation System without replacing the existing Switchboard.

IoT at just 7$ in your existing switchboard

This is a ESP32 dev kit v1 bluetooth based controller that can be used with ROS, its rechargeable, has buttons, joystick and 9 dof IMU.

[2020] ROS bluetooth controller [prototype]

maximiliano-rojas Maximiliano Rojas

2021 Hackaday Prize

IoT Nixie Clock can be controlled via Arduino Cloud or Amazon Alexa thanks to the Arduino Nano 33 IoT.

Voice Controlled Nixie Clock - Alexa & IoT Arduino

marcin-saj Marcin Saj

A 3030 frame prototype printer with some innovative mechanics

Wipkat Slippy 3D Printer

es-pronk E/S Pronk

A 128x32 pixel OLED allows the user to configure the operation of a desk lamp

OLED white LED controller.

If you have no access to medical personal protective equipment, you can construct a low cost face shield from items at a local corner store.

Minimal Resource Low Cost Soda Bottle Face Shield

View all

Bits