0%

0%

Chris Weiss

Neophyte hacker of embedded, flying, extruding, receiving, and computing things.

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

github

This user joined on 05/29/2016.

Projects I Like & Follow

Hackaday Prize 2019

A dynamics oriented quadruped for research and education.

SmallKat: An adorable dynamics oriented robot cat

Kevin Harrington

A 252 electromagnet-matrix that controls Ferrofluid

Fetch: A Ferrofluid Display

Applied Procrastination

A 3D printed clock in PLA. It has an 8 day runtime with an accuracy of 1-2 minutes per week.

3D Printed Pendulum Clock

Hackaday Prize 2019

This is a design for a low-cost extruder for printing objects directly from recycled plastic flakes instead of using filament.

Trash Printer - Recycled Plastic 3D Print Head

A re-creation of the minimoog using Teensy 4.0

Teensymoog

A touchscreen control panel for Grbl controllers with MPG handwheel and hardware inputs.

Touchscreen Control Panel for Grbl

A 3d printed split-flap display using a 28byj-48 stepper motor

Split-flap display

Hackaday Prize 2019

Terrain-going quadruped. 3D printable. Two servo drive.

Landbeest walking robot

Hackaday Prize 2019

An ESP32-based open source audio synthesis platform suitable for eurorack modular synthesizers, <1ms latency, 44.1kHz samping rate.

Eurorack audio synthesis platform

This project uses 3D printing and a little lathe work to adapt an existing DIY RC aircraft create a Vertical Take-off and Landing craft

Tilt Rotor VTOL RC aircraft

Driving controller-less graphics LCD with Arduino

Arduino CLGLCD

a custom three axis cnc machine for carving candles.

CNC Candle Carver

Use PrintRite to watch your printer so you can sleep/work/etc without worry of failures destroying your equipment

PrintRite - Tensorflow for 3D Printing

An automata music sequencer using cams, gears and pulleys to program the note sequence. Music generated by 555 square wave output.

Automata Music Sequencer

Claw lids - recently designed spool holder for 3D printer

Smooth spool holder with no bearing

By combining 3d parts, gyro, and a stepper, I made a programmable foot pedal for my cheap GTAW welder! General remote knob turner.

3d Printed knob turner - remote TIG amp control!

Designing a compact coaxial gearbox that can fit in the neck of a 3D printed motorized lamp.

Making a Coaxial Gearbox for a Rotating Lamp

marciot marciot

This project shows how to generate gears in OpenSCAD that can be used to transmit torque between two non-parallel, non-intersecting shafts.

Crossed Helical Gears in OpenSCAD

marciot marciot

View all

Bits

data wrote 08/10/2019 at 10:47

Dear Chris, thank you for following my project at https://hackaday.io/project/163505-cc2531-usb-adapter-antenna-mod

Are you sure? yes | no

Patrick Van Oosterwijck wrote 09/07/2018 at 19:35

Thanks for your interest in my #wESP32: Wired ESP32 with Ethernet and PoE project Chris!

Are you sure? yes | no