0%

0%

Electronx

I like to make "things"

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 08/07/2022.

My Projects

Vertical flight using Canard Fin based Controls And With IMU data from the AHRS system

Fin Controlled Active Rocket Stabilization System

Reverse Engineering of Artillery Sidewinder x2 Bltouch auto bed leveling sensor Electronics PCBA and Mechanical

Artillery X2 Bltouch Reverse Engineering

Projects I Like & Follow

The 2017 Hackaday Prize

Micro Smart LiDAR Sensor

MappyDot

I rebuilt my Passap E6000 knitting machine so that I can now control not only the front but also the rear needle bed.

Passap E6000 rebuilt and replaced console

irene-wolf Irene Wolf

Project to build the first working replica of the 1987 Soviet concept design.

SPHINX (СФИНКС) Home Computer System

nick-poole Nick Poole

How to use the Anycubic Mega Pro laser addon with LightBurn

Anycubic Mega Pro running with LightBurn

ringo2k Ringo2k

Open-source design for a 3d printer that can print metal at a low cost.

FDM 3D Metal Printer

The 2018 Hackaday Prize

Do you want a drone ready to be in the air 24 hours/day, 7 days/week? We're propossing this automatized drone supercharger. Go up darling!!!

Drone Supercharger

frasanz frasanz

The 2020 HDP Dream Teams are participating in a two month engineering sprint to address their nonprofit partner. Follow their journey here.

2020 HDP Dream Team: UCPLA

supplyframe-designlab Supplyframe DesignLab

Dog chewed up old remote so I painstakingly designed and 3d printed a new case.

Chewed up remote repair

alex-rich Alex Rich

An open-source dual-channel SDR Raspberry Pi HAT with up to 6 GHz tunable range

CaribouLite SDR for RPI

david-michaeli David Michaeli

The 2018 Hackaday Prize

ROS mobile robot base for everyone

ros-omni-base

panovvv panovvv

Hackaday Prize 2020

We show how to build IOT WiFi Motion Sensor powered on a battery with email notification over IFTTT.

WiFi Motion Sensor (3D print) - DIY

The 2018 Hackaday Prize

An open-source panoply of UAVCAN connected boards to enable smart sensors and actuators for modular robotics development

CVRA's Robotics CAN Ecosystem

salah-missri Salah Missri

This adds an extra layer of security against microphone attacks by allowing the user to ground out the data line shared by the microphones.

Echo Dot Hardware Microphone Mute Modification

andrew-peters Andrew Peters

3D Print in one piece, Less than 10 hours!

2S 18650 Mini FPV Drone

a universal IR remote controller with only WIFI connection required by RTL8722DM

Universal IR remote controller

michael-zhang Michael Zhang

Raspberry Pi, Python 3, and IC powered thermometer

Hardware / Software Thermometer

ESP32 with mpu6500, bmp280, qmc5883 and OLED display.

ESP Handheld IMU

markwarrenee markwarren.ee

Electronic paste dispenser with pick and place pen

Electronic solder paste dispenser

jung-hoon-lee Jung Hoon Lee

View all

Bits