0%

0%

Est

Electronic hobbist.

Thailand

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 07/04/2014.

My Projects

The game of connect four doubles as a scroll text display

Connect four

The 2016 Hackaday Prize

A tower high 90cm made out of acrylic that lights up with the music or sensing the position of a hand on top of it.

Interactive VU LED tower

Light effects that follow the music, made of acrylic milled with DIY CNC router

Acrylic light effect tower

A led matrix that can be seen through and can be viewed both sides

Acrylic led matrix

This toy is all made of clear 6 mm acrylic that i cat with my home made CNC router.

Theo Jansen RC toy

I modified a fan adding a persistence of vision effect. The lights are fixed and illuminate three symbols on the propeller blades.

POV FAN

View all 13 projects

Projects I Like & Follow

The 2016 Hackaday Prize

Hobby brushless motors are incredibly cheap and powerful. However we need a way to make robots out of them. ODrive is that way.

ODrive - High performance motor control

The 2017 Hackaday Prize

A 2.5mm thick flexible smart watch with e-ink display, BT 4.0, and health sensors.

Flexible Smartwatch

The 2017 Hackaday Prize

Build your own touch screen solution adapted on your TV by using some CIS or CCD sensors from old scanners

Magic Frame : Turn Everything into a Touch Area

The 2016 Hackaday Prize

Low power Arduino based (smart)watch

Chronio

The 2016 Hackaday Prize

An FFT spectrum analyzer for machinery vibration analysis, using open source hardware and software

Open Source FFT Spectrum Analyzer

The 2016 Hackaday Prize

20x10 WS2812 LEDs driven by Raspberry Pi/Arduino to play games like Tetris in the living room

Raspberry Pi Retro Gaming LED Display

The 2016 Hackaday Prize

Portable recording studio.

piStudio

An open telecommunicator device, independant from SIM CARDS and Telecom providers. On BT,868, 430 and 905 Mhz + ESP32

The LoraWan Pager

The 2018 Hackaday Prize

Compact, handheld air guitar with four LiDAR strings and Bluetooth

Litar: LiDAR Air Guitar

The 2016 Hackaday Prize

The Glowboard Plotter plots images using 64 UV LEDs attached in a line moved over a 120cmx60cm glow-in-the-dark sheet by a stepper.

Glowboard Plotter

Can we build a great board for under $400 in less than 3 weeks? (using a few pre-made kit parts)

Electric Longboard

The 2016 Hackaday Prize

Retro Gaming POV LED display

SPINO

An open source 4 foot by 8 foot CNC router kit for under $500

Maslow CNC

The 2016 Hackaday Prize

DISPENSER V5 for Manual solder Paste application (without compressed air) to PCB for reflow soldering or Hot-Air Soldering techniques.

Solder Paste Dispenser V5 - AIR FREE & 5V USB-NEW!

Tindie

A place for Tindie sellers and the community to meet and stretch their legs

Tindie Dog Park

The 2017 Hackaday Prize

An electro-mechanical system designed to allow a disabled musician to play the guitar with one hand (and a foot).

Adaptive Guitar

The 2016 Hackaday Prize

A wireless glowing programmable juggling props, with 9-DOF IMU

Rastello Club

A DIY solder paste dispenser. A DRV8825 drives a microstepper actuator in combination with syringe to deliver paste.

Hand Held Solder Paste Micro-dispenser

View all

Bits

Poh Hou Shun wrote 09/23/2015 at 01:37

Thanks for the skull!

Are you sure? yes | no