0%

0%

bernhard

brings electronics and robotics to the next level

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 11/03/2019.

My Projects

Open Source 3D printable outdoor robotics platform

JECCbot mini

StepperMotorFeatherWing with Trinamic TMC5130A-TA drivers for two stepper motors compatible with Adafruit Feather

StepperMotorFeatherWing

HighPowerMotorFeatherWing with Infineon IFX007T drivers for two DC motors, up to 40V and 55A, compatible with Adafruit Feather

HighPowerMotorFeatherWing

HMI FeatherWing with EA DOGM132-5 2.1" display and joystick compatible to Adafruit Feather

HMIFeatherWing

Projects I Like & Follow

Follow for the 'Hacklet' and latest news about hackaday.io

Hackaday.io Project

The 2015 Hackaday Prize

Arduino connects to the TX line (of a router, RPI) and display serial data on smartphone over WiFi

Hardware serial port monitor with WiFi

The 2016 Hackaday Prize

Codename Hardpass: A Password Manager on the Raspberry Pi Zero...suffering featuritis.

RPi Zero WiFi-Enabled Hardware Password Manager

A 3D printer for printing with welding wire

Wire 3D Printer

dominik-meffert Dominik Meffert

Rpi B+ and Webcam security system with motion, dvr, and remote access.

Raspberry Pi Security System

Mike [Cazzwell] Cassell

Very tiny 256GB of storage!

Raspberry Pi Zero Altoid NAS

Active mixing, fused filament fabrication 3D printer.

Arcus-3D-M2 - Mixed material filament printer

daren-schwenke Daren Schwenke

Official Hackaday Prize Entry

The Tinusaur is a small board with ATtiny85 microcontroller and the minimum components to run properly plus shield headers and a battery

The Tinusaur

neven-boyanov Neven Boyanov

The 2018 Hackaday Prize

A drum machine, base synth and arpeggiator that fits in your pocket. User interface inspired by classic mod tracker software.

FATCAT: Altoids Tin Mod Tracker

uGFX was written for use with makefiles. Using it in arduino is possible with minimal effort, though. Here's how.

using uGFX in Arduino

Driving controller-less graphics LCD with Arduino

Arduino CLGLCD

Week of Arduino

Arduino Skillz

Increase the Color Gamut, Primary color purity and make stunning vivid and accurate LCD monitor with RGB LEDs. Inspired from Dolby PRM-4220.

Wide-Gamut monitor with 5050 RGB LED mod.

thomas-chanon-wangtrirat Thomas Chanon Wangtrirat

The 2017 Hackaday Prize

Lumos mimics the natural light of the Sun in order to regulate sleep-inducing hormones & improve sleep using Machine Learning

LUMOS: Smart Lamp for Better Sleep

An analog clock that displays the time using WS2812 LEDs instead of physical hands.

RGB LED Analog Clock

jackw01 jackw01

Controls things that get hot. Probably Arduino compatible. Only slightly dangerous.

reflow

3D printed ball screw actuator focusing on minimal cost.

3D Printed Ball Screw Actuator

The 2015 Hackaday Prize

This can mill, cut and even 3D print

4D Prototyping at its best

zoltan-kobolak Zoltan Kobolak

View all

Bits