0%

0%

brtnst

I like making things.

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 01/18/2018.

My Projects

The 2018 Hackaday Prize

Do you miss those old small devices in your palm? Don't be sad, you can always build your own!

SDA - The best new PDA

Things I've Built

RpiBox

Raspberry Pi in a box from 2013 (before it was cool). Fully featured with on board RTC, wi-fi, usb hub and small i2c ADC for battery measurement.

Projects I Like & Follow

The WiPhone project is an open source mobile IP phone. WiPhone is intended to be hackable, modular, cheap, and open, while remaining usable.

ESP32 WiPhone

The 2018 Hackaday Prize

Make & 3D print your own phone with sensors, displays, electronics, batteries and antennas. Customize Android and do exactly your thing!

Kite : Open Hardware Android Smartphone

Motorized model of Mars rovers Curiosity and Perseverance For Under $500

Sawppy the Rover

Adding a "real" lens to Fujifilm's first (and only) analog square format instant camera.

Instax SQ6 Lens Transplant

The single chip embedded Linux board

Blueberry PI

Marcel Thürmer

The 2018 Hackaday Prize

PDP-11 compatible motherboard in mini-ITX form factor

PDPii

Open-source Arduino compatible heating regulator to give you ultimate control and monitoring over your heating system

OpenTherm Regulator

Resurrecting Psion's SIBO/EPOC16 Platform For The 21st Century

The Last Psion

Mainline Linux kernel could live without MMU, and it has been ported to STM32 since kernel 4.2. Let's make an STM32 computer from scratch!

uc-PC, linux computer on stm32

hhuysqt hhuysqt

A custom 136 key mechanical keyboard, inspired by the Sun Type 5 keyboard, and the classic phone dial-pad.

Sundial Keyboard

Jesse Robinson (beacon)

A small MCU based PIM with Pager functionallity

PIMP (Personal Information Manager & Pager)

The 2018 Hackaday Prize

Square Inch music widget

Noise Nugget

Fabien-Chouteau

vga analog video synth

VGA VIDEO SYNTH

goal: build a photo realistic and functional tricorder from tng. this means creating custom PCBs w/ chips, firmware/software, and a chassis.

Real Tricorder: With Scanny Bits (TNG)

This video is around ESP8266 module and how to flash mongoose OS to it.It also demonstrates some basic GPIO programming using javascript.

Mongoose OS Installation on ESP8266 and GPIO Acces

A diy clock with VFD tubes. This project implies an AVR, a RTC, 3 power supplies and the drivers for the tubes.

Yet Another VFD Tube Clock

The 2018 Hackaday Prize

A wearable personal digital assistant always by your side, helping you through your day.

Jeeves

A digital 7-segment clock reusing some logic of a Saturn-5 rocket flight computer module

Saturn-5 LVDC Module Clock

View all

Bits