0%

0%

clatour007

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 11/09/2017.

Projects I Like & Follow

The 2018 Hackaday Prize

A smaller and cheaper open source brushless motor

PCB Motor

The WiPhone project is an open source mobile IP phone. WiPhone is intended to be hackable, modular, cheap, and open, while remaining usable.

ESP32 WiPhone

Collecting snippets that can quickly be copied to assemble a program for different sensors etc. Mostly about ESP8266/32 with Arduino IDE.

ESP cookbook

The 2018 Hackaday Prize

An open hardware-software framework based on inertial sensors that anyone can use to build a human motion capture system.

Motion Capture system that you can build yourself

Bruno Laurencich

An attempt at implementing a direct link between a linux station and an ESP module using ESPNOW protocol for real time robot control

Linux-ESPNOW

Takes 3D surface scans at close range. It is simple to construct as it uses off the shelf hardware and software.

3D scanner

Porting the Android on-device speech recognition found in GBoard to TensorFlow Lite or LWTNN

Android offline speech recognition natively on PC

Hackaday Prize 2019

This is a design for a low-cost extruder for printing objects directly from recycled plastic flakes instead of using filament.

Trash Printer - Recycled Plastic 3D Print Head

A mist-based tower system for growing leafy green vegetables

The Little Green Tower

open hardware 2 GHz to 13 GHz two-port vector network analyzer

Vector Network Analyzer

The 2018 Hackaday Prize

Super-small BQ25504-based device charges a LiPo battery at ~7 mA using an inexpensive solar cell in direct sunlight

Ultra-Low Power LiPo Charger via Energy Harvesting

The 2018 Hackaday Prize

A modular smart speaker designed with localized speech recognition, customization and security in mind.

Modular Smart Speaker Assistant (jarvis-pi)

Open Source SHRED-Buddy3D UPcycler turns leftover filament bits, bottles & fishing line into pellets for 3D printing.

3D Printed Open Source UPcycler : SHRED-Buddy3D

Take an unloved old camera and give a new lease of life

Adventures in Digitising Vintage Cameras

The S4 program is a small satellite platform for doing science on high altitude balloons, hobby and amateur sounding rockets.

Student Science Satellites and Sounding Rockets

This project computes angles of arrival for two PS Eye microphone arrays and plots lines representing the sound source.

PS Eye GCC-PHAT

BLE4.0 wireless control

Wireless control to video devices

Jie Zou Jie Zou

User friendly environment for filament changes using gcodes in 3D printers with 1 extruder.

Filament Changer for Marlin 3D printers GUI

View all

Bits

Bruno Laurencich wrote 08/15/2018 at 11:39

Hi, thanks for following my #Motion Capture system that you can build yourself !!

Are you sure? yes | no

Kris Winer wrote 06/14/2018 at 22:30

Thanks for liking my Solar Cell LiPo Battery Charger Project!

Are you sure? yes | no