0%

0%

clatour007

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 11/09/2017.

Projects I Like & Follow

The WiPhone project is an open source mobile IP phone. WiPhone is intended to be hackable, modular, cheap, and open, while remaining usable.

ESP32 WiPhone

The 2018 Hackaday Prize

A smaller and cheaper open source brushless motor

PCB Motor

carl-bugeja Carl Bugeja

Collecting snippets that can quickly be copied to assemble a program for different sensors etc. Mostly about ESP8266/32 with Arduino IDE.

ESP cookbook

turo-heikkinen Turo Heikkinen

The 2018 Hackaday Prize

An open hardware-software framework based on inertial sensors that anyone can use to build a human motion capture system.

Motion Capture system that you can build yourself

bruno-laurencich Bruno Laurencich

An attempt at implementing a direct link between a linux station and an ESP module using ESPNOW protocol for real time robot control

Linux-ESPNOW

thomas-flayols Thomas Flayols

Takes 3D surface scans at close range. It is simple to construct as it uses off the shelf hardware and software.

3D scanner

Porting the Android on-device speech recognition found in GBoard to TensorFlow Lite or LWTNN

Android offline speech recognition natively on PC

Hackaday Prize 2019

This is a design for a low-cost extruder for printing objects directly from recycled plastic flakes instead of using filament.

Trash Printer - Recycled Plastic 3D Print Head

sam-smith Sam Smith

open hardware 2 GHz to 13 GHz two-port vector network analyzer

Vector Network Analyzer

jon-klein Jon Klein

A mist-based tower system for growing leafy green vegetables

The Little Green Tower

chris-johnson Chris Johnson

The 2018 Hackaday Prize

Super-small BQ25504-based device charges a LiPo battery at ~7 mA using an inexpensive solar cell in direct sunlight

Ultra-Low Power LiPo Charger via Energy Harvesting

kris-winer Kris Winer

The 2018 Hackaday Prize

A modular smart speaker designed with localized speech recognition, customization and security in mind.

Modular Smart Speaker Assistant (jarvis-pi)

chris-jones Chris Jones

Open Source SHRED-Buddy3D UPcycler turns leftover filament bits, bottles & fishing line into pellets for 3D printing.

3D Printed Open Source UPcycler : SHRED-Buddy3D

venture-bit Venture Bit

Take an unloved old camera and give a new lease of life

Adventures in Digitising Vintage Cameras

The S4 program is a small satellite platform for doing science on high altitude balloons, hobby and amateur sounding rockets.

Student Science Satellites and Sounding Rockets

ken-biba Ken Biba

This project computes angles of arrival for two PS Eye microphone arrays and plots lines representing the sound source.

PS Eye GCC-PHAT

A wireless programmable neopixel tie (it even has HomeKit integration), I wore that to prom!

LighTIE

ragul-balaji Ragul Balaji

User friendly environment for filament changes using gcodes in 3D printers with 1 extruder.

Filament Changer for Marlin 3D printers GUI

luis-diaz Luis Diaz

View all

Bits

Bruno Laurencich wrote 08/15/2018 at 11:39

Hi, thanks for following my #Motion Capture system that you can build yourself !!

Are you sure? yes | no

Kris Winer wrote 06/14/2018 at 22:30

Thanks for liking my Solar Cell LiPo Battery Charger Project!

Are you sure? yes | no