0%

0%

Thomas Flayols

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

github

This user joined on 02/16/2017.

My Projects

An attempt at implementing a direct link between a linux station and an ESP module using ESPNOW protocol for real time robot control

Linux-ESPNOW

thomas-flayols Thomas Flayols

The 2018 Hackaday Prize

A simple board, driving 2 nixies from discrete transistors and an Atmega8.

Low cost dual Nixie Driver

thomas-flayols Thomas Flayols

The 2017 Hackaday Prize

Control and monitor any lighting setup : a low cost 1-Wire module.

Low cost Smart Switch

thomas-flayols Thomas Flayols

How to use LIDL "smart" battery, to power custom electronic such as robots or ebike, Reverse engineering their bluetooth connectivity..

LIDL PARKSIDE Battery hacks

thomas-flayols Thomas Flayols

Things I've Built

CNC Router

From low cost wood Router; Made of MDF wood and recycled stepper motors

Numitron clock

Nutrition tubes from old gaz station; DS1307 RTC + ATMega32

LED Wall for concerts

With 500 WS2801 RGB LEDs Arduino + Serial + Glediator SW

POULOMATIC ; automatic chiken door

It open and close chicken house at settable times. From IKEA FIXA Electric Screwdriver (motor + battery + BMS) Arduino pro mini, TFT screen, Relays

Projects I Like & Follow

The 2018 Hackaday Prize

A high speed and high torque robotic actuator using low-cost brushless motors, custom controller, 3D printed parts and bearings.

3D Printed Robot Actuator

paul-gould Paul Gould

Hackaday Prize 2019

A powerful, compliant actuator for legged robotics

OpenTorque Actuator

Hackaday Prize 2019

A low-cost, high-performance bipedal walking robot

Blackbird Bipedal Robot

An open-source, affordable, dynamic quadruped robot

mjbots quad

josh-pieper Josh Pieper

A flexible power supply for Nixie tubes. Input voltage can be from 3V to 12V. Output up to 200V. It uses commercially available transformers

Nixie Tube Power Supply

paul-andrews Paul Andrews

Tracking human motion for digital animation.

Optical motion capture system

robert-gowans Robert Gowans

The 2018 Hackaday Prize

Robot on a PCI-e Stick (ROPS) is a project to provide a flexible I/O solution for ROS robots.

ROPS

good looking and clever 4-legged robot

Dizzy Wolf

A tape echo effect for guitars/vocals built from a cheap portable cassette player and 3D printed parts.

Janky Tape Echo

The 2017 Hackaday Prize

An open-source robot that helps makers build low-cost robots without having to start from scratch.

Two Leg Robot

ted-huntington Ted Huntington

Drive BLDC as direct-drive servo motor

BLDC motor driver for robotics

Convert an off the shelf RF control outlet into a RF light switch.

RF Outlet to Light Switch Hack 2.0

eric-moyer Eric Moyer

Open source, low-cost robotic quadraped for reinforcement learning

OpenK9

ben-nortier Ben Nortier

A serious 6-axis robotic arm that performs on-par with commercial robotic arms, but costs less than $1000 to build.

RM1 - An Affordable Industrial Robotic Arm

david-shelenev David Shelenev

A weighing scale using a ATmega48, a hx711 ADC and a 1x16 hd44780 display.

Weighing Scale in <1kB Code

An attempt to an universal EtherCAT slave based on the STM32F303 and the LAN9252

DieBieSlave - An universal EtherCAT slave

danny-bokma Danny Bokma

Esp8266 and Mit App Inventor together for controlling robot using simple http get request.

ESP8266 wifi robot remote control using android ap

satya-sankar-sahoo satya sankar sahoo

A simple project using avr-libc and some cheap peripherals to implement a clock which counts down to a major life event.

My Half Life Clock

mark-vandewettering Mark VandeWettering

View all

Bits