0%

0%

f4drj

Passionately Maker.

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 05/02/2021.

My Projects

How about a tiny rpi based cyberdeck, Huh ?

YAHRC - Yet Another Ham Radio Cyberdeck

Projects I Like & Follow

KaRadio A fully featured wifi web radio player with only low cost boards. with or without a vs1053 board

WiFi Webradio on ESP8266 or ESP32

Jean-Pierre Cocatrix Jean-Pierre Cocatrix

The 2017 Hackaday Prize

Raspberry Pi Zero 3D Printed Video Streaming Robot

ZeroBot - Raspberry Pi Zero FPV Robot

The 2015 Hackaday Prize

An Arduino based Solar MPPT charge controller.

ARDUINO MPPT SOLAR CHARGE CONTROLLER

The 2018 Hackaday Prize

Affordable and open-source LiDAR based on 3x VL53L0X ranging sensor

xLiDAR

Official Hackaday Prize Entry

How I did to remotely control and monitor my home made Off-grid Photo voltaic System

My Off-grid Solar System Monitoring

Michel Kuenemann

The 2015 Hackaday Prize

Arduino compatible indoor navigation system with small form factor.

LPS Mini

The 2015 Hackaday Prize

A handheld, battery powered, sensor array unit for environmental monitoring focused mostly on air quality using a global infrastructure.

Portable environmental monitor

Hackaday Prize 2019

Opensource, inexpensive, mobile thermal camera for use in electronics, home inspection, non-contact thermometer, heat distribution and more.

Open Thermal Camera

Hackaday Prize 2019

I fancied making the smallest possible inspection bot I could and here is what I ended up with, measuring just 65x40x30mm!

Nano Fpv Tank Inspection Bot

Supplyframe DesignLab: 2022 Hackada…

Portable spot welder that doesn't need microcontrollers, uses recycled industrial thyristor and mostly off-the-shelf components

Not-so-smart capacitive discharge spot welder

A power supply solution for products requiring up to 600mA @ 5V from 2 x 55F Capacitors and small 5V Solar Panel

Solar Super Capacitor Power Supply

3D printed toroidally wound axial flux permanent magnet air core motor. 3DTAFPM?

3D Printed Axial Flux Motor

Retro nostalgia Pi 400 cyberdeck for "jacking in," open source hacking, and remembering terminals, bulletin board systems and early Internet

Bootless Pi 400 Cyberdeck

Charles Stevenson

2021 Hackaday Prize

All the sections required to make a full size humanoid robot with integrated AI models - an open source response to corporate robots

Modular Open Source Humanoid AI Robot

A very simple, low cost MPP solar charger built around the venerable 555 timer

555 MPP solar charger

Patrick Van Oosterwijck

ESP32 based Ethernet I/O module with MQTT support

Ethernet IO

A simple cable tester using a 555 as the heart of the system

Cable Test RJ45 / RJ12

This device pulls water out of dry air with nothing more than solar heating.

Solar Passive Atmospheric Water Generator

View all

Bits