0%

0%

jolandoja

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

Google+

This user joined on 12/07/2017.

Projects I Contribute To

Reverse engineer, reprogram or otherwise use the UV/OV/balancing circuits built into each of the 16 modules in a Tesla Model S battery pack.

Model S BMS hacking

Projects I Like & Follow

Reverse engineer, reprogram or otherwise use the UV/OV/balancing circuits built into each of the 16 modules in a Tesla Model S battery pack.

Model S BMS hacking

The 2016 Hackaday Prize

A super cheap decently resolving open source VIS-spectrophotometer. The cheapest in the OtterVIS line.

OtterVIS LGL spectrophotometer

The 2016 Hackaday Prize

Who wouldn't want an internet enabled coffee maker!

IoT Coffee Maker

From raw RF samples of the GPS L1 C/A signal to a position fix, in a completely open fashion

Full Stack GPS Receiver

Mike "Hamster" Field

The 2017 Hackaday Prize

Emergency Button for 7$ based on ESP8266 Wifi board

Emergency button : Reliable, Inexpensive & Design

The 2017 Hackaday Prize

A complete LiFePO4 based solar power supply for IoT devices

LiFePO4wered/Solar1

Patrick Van Oosterwijck

This Gopro hack allows wired control for robotics applications, using any microcontroller, without break or damage the buttons

Gopro Hero 4 wired control

Using an ESP8266 to program AVR micros.

ESP8266 Wireless AVR (Arduino) Programmer

Hardware Accelerated Machine Vision platform using the Xilinx Zync 7000 FPGA+ARM System on a Chip and OV04689-H67A 4K CMOS Sensor

ZyncMV

AVR (lordKiCAD)

Don't want to hard code your Blynk AuthID or WiFi credentials into your code? Then use Embedis to store and change them on-the-fly!

Blynk using Embedis for Settings

The 2016 Hackaday Prize

Quoting Einstein "If the bee disappeared off the surface of the globe then man would only have four years of life left.

Save the bees save the planet - IoT hive platform

Simple ESP32-based robot controlled with ESP8266-based wifi remote

Robo32

We want the Lego EV3 robot to create a 2D map of a room

Mapping with EV3 robot

Develop an arduino-based controller for BMS units (Tesla, Chevy, BMW, Nissan, etc.) for use in auto, marine and residential applications.

EV Battery Management Controller

The 2018 Hackaday Prize

The Nixie Shield allows an Arduino board to connect any nixie tube you want to use in your projects.

Nixie Tube Shield for Arduino

ESP8266 Internet Button project: when button is pressed, a cloud backend gets a notification and performs an action.

Internet Button ESP8266 & AWS IoT full tutorial

The 2017 Hackaday Prize

Developing an Augmented Reality tool for the creation of personal time zones.

Unstandardised Time

Two-Relay control with any Pi Model, Plus a complete Web page!

Hardware Control with any Pi

View all

Bits