0%

0%

Tinus

Computer and Electronic Engineer passionate about triathlon.

Beaumont, Canada

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 05/05/2020.

Projects I Like & Follow

Syma X5C Drone meets DJI FC40 WiFi 2.4GHz Camera bringing FPV to a cheapest level

Restyled Syma X5C Drone FPV Mod

Play Flappy Bird on Arduino with Nokia 5110 LCD

Flappy Bird on Arduino

Squeak is a LoRaWAN GPS pet tracker with a very long battery life. It allows you to ask your pets to share their location

Squeak: GPS pet tracker

mihaicuciuc mihai.cuciuc

An Arduino powered flow-meter for use in geography river studies and environmental monitoring projects

Open Flow Meter

The 2016 Hackaday Prize

Using the Arduino Uno, a DC motor controller, a DC motor power supplies, and sensors, I have made my chicken coop automated.

Chicken Coop Automation

Connect two hosts via a serial connection, but with total galvanic isolation

Isolated USB null modem

nick-sayer Nick Sayer

Supplyframe DesignLab: 2022 Hackada…

Be your own network operator

Local LoRaWAN infrastructure

mihaicuciuc mihai.cuciuc

An easy to use BLE module for the Raspberry Pi based on the nRF51x chipset

BLEezy: Raspberry Pi Zero

Usb phyton controlled heated bed for M3D 3d printer, making abs printing possible

Heated Bed for M3D 3d Printer

Generally we have only seen drones fly, but how cool would it be if we can maneuver it on the ground as well!

HYBRID DRONE

shivani SHIVANI

This device converts your fdm printer to a full color powder printer.

ColorPod full color 3d printing

Internet enabled lock for main door

IoT Main Door Lock

danielblanquez daniel.blanquez

For a house with 5 separate heating zones with four pumps. I needed a configurable controller.

Multi-Zone Heating Controller

Create 3D printing filament from PET flakes. Bottle → Flakes → FILAMENT → 3D Printing

3D printer filament maker

petmat-z PETMAT z.ú.

Coin-cell operated, wireless IoT soil moisture sensor using mcThings! Alerts, status levels, temperature!

Wireless IoT Soil Moisture Sensor Using mcThings!

Easy and Fun: Track objects with a Raspberry Pi, a camera and an Arduino in less than an hour!

Raspberry+Arduino CamTracker

marcelo-valeria Marcelo Valeria

The 2018 Hackaday Prize

quickly create a cyclone dust separator with 2 buckets and a few 3D printed parts.

Easy cyclone for your shopvac with 3D printing

audrey-robinel Audrey Robinel

din rail enclosure to mount the RPI4 on a cabinet

Raspberry Pi 4B din rail enclosure

View all

Bits

mihai.cuciuc wrote 10/24/2022 at 05:12

Cheers Tinus! Thanks for your interest in our local LoRaWAN network deployment!

Since then I migrated the gateway to The Things Network as I feel that makes more sense for the community.

Are you sure? yes | no