Close
0%
0%

philippe

like to make

France
Following
Send a private message
Similar accounts worth following
1 Followers
36 Following
0 Projects
0 Likes
philippe
Send a private message

This user joined on 06/21/2018.

144.6k
2.9k
81
608
Cheap 3D printed 4 legged robot, that almost looks like boston dynamics spot but moves like a newborn.
Project Owner Contributor

DIY hobby servos quadruped robot

miguel-ayuso-parrillaMiguel Ayuso Parrilla

99.4k
1.4k
18
482
Affordable and open-source LiDAR based on 3x VL53L0X ranging sensor
Project Owner Contributor

xLiDAR

jrodrigoJRodrigo

94.5k
843
112
598
A high speed and high torque robotic actuator using low-cost brushless motors, custom controller, 3D printed parts and bearings.
Project Owner Contributor

3D Printed Robot Actuator

paul-gouldPaul Gould

87.9k
297
23
260
Making my own automatic chessboard
Project Owner Contributor

Automatic Chessboard

phantom-chessboardPhantom Chessboard

38.9k
348
27
322
A 252 electromagnet-matrix that controls Ferrofluid
Project Owner Contributor

Fetch: A Ferrofluid Display

applied-procrastinationApplied Procrastination

21.6k
156
21
118
Open up a 2010 iPad, remove its logic board, and fabricate a new board based around the Raspberry Pi CM4.
Project Owner Contributor

Put a Raspberry Pi CM4 into an original iPad

evanEvan

18.2k
196
11
189
Your 3D content on a real PoV volumetric display, no glasses needed!
Project Owner Contributor

VVD: an open source Real 3D Volumetric Display

madaeonMadaeon

14.8k
3.5k
13
158
Single rotor, "human-safe", selfmade ball-drone with air vanes for position control
Project Owner Contributor

The Ball-Drone Project

benjamin-prescherBenjamin Prescher

7.9k
91
1
96
Wireless device for measuring temperature, humidity and pressure with a e-paper display, with a weather forecast, batteries -operated
Project Owner Contributor

Mini weather station Efekta with e-paper display

andrew-lamchenkoAndrew Lamchenko

6.4k
65
17
50
Reading up to 9 XIaomi Mi Temperature and humidity sensors using nodeRed+Bash+gatttool
Project Owner Contributor

Reading a bunch of BLE sensors with raspberryZero

javierJavier

5.1k
64
17
41
Easier to build, more powerful scanning and post scan processing of films.
Project Owner Contributor

8mm Film Scanner V2

antonAnton

4.7k
4.7k
0
15
MFRC522 RFID on ESP8266 featuring WebSocket, JSON, NTP Client, Javascript , SPIFFS
Project Owner Contributor

ESP RFID

omersiaromersiar

4.1k
65
19
64
E-Paper Multipurpose Dashboard powered by Li-Po with roughly four months battery life
Project Owner Contributor

EPaper Dashboard

boris-shabanovBoris Shabanov

946
1k
0
7
VR done the hard way - for the sake of teaching.
Project Owner Contributor

DIY Virtual Reality Headset

matthew-l-faerberMatthew L Faerber

938
936
0
3
The Novel Integration of Additive Manufacturing and Autonomous Craft (N.I.A.C.A.M)
Project Owner Contributor

N.I.A.C.A.M: An Autonomous 3D printing Drone

sujoy2900sujoy2900

807
807
0
9
A versatile multi-vehicle flight control system, tracking station, Launch Pad/Test Stand and Mission Control Unit for hobby rockets.
Project Owner Contributor

Raspberry Pi Rocket Science

obsoletesupermanobsoletesuperman

732
715
2
9
Simple Breakout Board with Winbond Flash Onboard connected SPI1, Pins for SPI-LCD on SPI2 to transfer ColorFonts and BigFonts between them.
Project Owner Contributor

Stm32f103 LCD Breakout

schuppSchupp

488
485
0
2
Monitor & optimize your utility consumption through this IoT Data Logger.
Project Owner Contributor

IoT Data Logger

alliedcAlliedC

View all

Share this profile

Share

Bits

Send a private message to philippe

Become cool instantly

Create your Hackaday.io profile like philippe and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Report user as inappropriate

You are about to report the user "philippe", please tell us the reason.