0%

0%

Marcos Eduardo Röhrig

Self learning IoT enthusiastic

Curitiba

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 05/01/2021.

Projects I Like & Follow

The 2017 Hackaday Prize

Mesh of sensors, zigbee, custom RF, BT, wifi, all to MQTT Gateways on Raspberry Pi with database, dashboard and webapps.

Home Smart Mesh

The 2017 Hackaday Prize

Philips Hue is nice but expensive... now there is a cheaper way.

DIY Complete Philips Hue Home Automation

mariusmotea marius.motea

A one stop shop with fixed 5V/12V/24V/USB metered power, adjustable power supply, voltmeter, continuity tester and basic oscilloscope.

Basic Hacker MultiBench

Expansion boards are designed to be easy to use in DIY IoT projects, low cost, reliable, saves the pain of cabling bread boards

STM32 Blue pill IoT expansion boards

Supplyframe DesignLab: 2022 Hackada…

Portable spot welder that doesn't need microcontrollers, uses recycled industrial thyristor and mostly off-the-shelf components

Not-so-smart capacitive discharge spot welder

Wojciech "adalbert" J

This will emulate the AVR code right out of the .ELF file

Arduino ATmega 328 Emulator

Convert MIPI CSI-2 2 lanes into DVP using a FPGA.

Raspberry Pi camera on Orange Pi Plus board

Supplyframe DesignLab: 2022 Hackada…

An open-source, low-cost, large-format 3D printer that can print directly from shredded plastic trash instead of filament

The Trash Printer - Version 3

sam-smith Sam Smith

Connect all needed electronics to NodeMCU, add life to them with a help of programming, install HomeAssistant on PC and let's roll!

Home Automation With NodeMCU, HomeAssistant & MQTT

A tiny Raspberry Linux computer with a keyboard, a daylight-readable screen, and a long-range transceiver

ShaRPIKeebo - Nano Linux Computer

The 2018 Hackaday Prize

A hardware and software balancing cart pole.

ZIPY : ZIPY Inverted Pendulum Yakshave

philip-zucker Philip Zucker

The 2018 Hackaday Prize

An IoT Air Freshener, using some 3D printing, a NodeMCU, Arduino IDE, IFTTT and Adafruit.IO. Configure your own triggers and have fun!

IoT Air Freshener

ExaGear Desktop brief feature description guide

ExaGear Desktop virtual machine for Raspberry Pi

The 2018 Hackaday Prize

Model and 3D print a mold to create a silicone rubber "skin" lattice for an easy to make custom prosthetic hand that matches your 3D scan

3D Scan to Custom Soft Prosthetic Hand

curt-white Curt White

I live in a rented flat and didn't want to shell out ~£200 for a Nest thermostat, so I decided to build my own.

Smart IOT thermostat

Internet enabled lock for main door

IoT Main Door Lock

danielblanquez daniel.blanquez

Hackaday Prize 2019

MQTT-like communication method to use over I2C to interconnect many devices.

Minion Network: MQTT-like Communication Over I2C

The ZS1100A is a USB based DC power supply designed to measure the power consumption of IOT devices. It is an improvement over the ZS-2102-A

ZS-1100-A IOT Power Meter

prajay madhavan

View all

Bits