0%

0%

84ace

I'm like a tractor, not very fast, but, can easily manage ploughing the field.

Newcastle, NSW

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 03/08/2020.

My Projects

This project's aim is to create hardware, software and an enclosure to be used as a smart battery isolator to protect the start battery.

ESP32 Smart Battery Isolator for 4x4s and Caravans

Projects I Contribute To

Uses LTC4162 to make a multi-cell battery charger that communicates over I2C port with a microcontroller.

LiPo/LiFe/PB battery charger based on LTC4162

Projects I Like & Follow

The 2017 Hackaday Prize

An affordable modular platform for open robotics development for hackers. Provides a jump start to build your own robot.

MORPH : Modular Open Robotics Platform for Hackers

roald-lemmens Roald Lemmens

The 2017 Hackaday Prize

Philips Hue is nice but expensive... now there is a cheaper way.

DIY Complete Philips Hue Home Automation

mariusmotea marius.motea

Hackaday Prize 2019

Creating a free & open source global IoT network, democratizing access to space by miniaturizing aerospace systems.

FossaSat-1, Open Source Satellite

julian-fernandez Julian Fernandez

Hackaday Prize 2019

This hybrid generator for drones is designed to get 10 times the flight time of a classic electric drone

HYBRID GENERATOR FOR DRONES

Interfacing 3.5" HD 1.44 MB Floppy drive through FDD connector with Arduino UNO

Arduino raw data 3.5" Floppy reader

lukas-vacek Lukas Vacek

Hackaday Prize 2019

The Arduino Nano Quick Project. Develop Everywhere.

Arduino Nano QP

alain-mauer Alain Mauer

Use your Wemos motor shield with steppers motors I2C custom slave interface

WEMOS Motor Shield firmware for steppers (I2C)

Hackaday Prize 2019

Convert FPV racing drone into an interceptor using Raspberry Pi

Open Source Air Defense

ray-patel Ray Patel

Measurement of uncomplicated electrical consumption using a powerful Blynk Dashboard

Meter PZEM-004 + ESP8266 & Platform IoT Blynk App

Hackaday Prize 2019

Grasp is a robotic hand designed to to be assembled by a non experienced user and can be useful for different applications.

Grasp Bionic Hand

xavi-cano Xavi Cano

The 2017 Hackaday Prize

Use any Bluetooth 4.0(BLE) device to control this agile little modular drone.

The UnbreakaBLE Micro Drone

anshul-sanamvenkata Anshul Sanamvenkata

The 2017 Hackaday Prize

A Network-on-Chip for the System-of-Systems Era Enabling mixed interface communication between embedded devices (MCU, sensors etc.)

InterNoC

lefteris-kyriakakis Lefteris Kyriakakis

The 2018 Hackaday Prize

I am trying to build a test bed for trying out localization and mapping algorithms.

QuadRotor testBed for localization and mapping

USPasp Smart ZIF socket version, Insert all AVR from pin 1 automatic identify chip and generate Clock to XTAL1 pin.

USBASP Smart ZIF socket!

Hossein Lachini

The 2018 Hackaday Prize

A low cost, open-source, universal-like remote control system that translates the user's spoken words into commands to electronic devices.

TV Remote Control via Offline Speech Recognition

cassio-batista Cassio Batista

A clock with 5 hands to show Time and Date

CalendarClock

michael-mller Michael Möller

Printing a Jesus nut for an RC helicopter

3D fix a helicopter

marius-taciuc Marius Taciuc

The Icarus is a FeatherWing-compatible (Feather) board with the nRF9160, made for easy cellular IoT development.

Icarus IoT Dev Board nRF9160 (LTE-M, NB-IoT, GPS)

View all

Bits