0%

0%

Deion

An Editor Working for Apogeeweb.

shenzhen

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

Twitter
Blog

This user joined on 06/15/2020.

My Projects

To make an amazing interactive snowflake with Arduino Nano.

Arduino Amazing Interactive Snowflake

This project is to build an LED flashing circuit on a breadboard.

Build LED blinking circuit with 555 oscillator

Projects I Like & Follow

The 2017 Hackaday Prize

I reversed engineered the canbus screen in my Clio and created a bluetooth remote control to listen to webradios without touching my phone.

Smart car radio

Hackaday Prize 2019

This is a design for a low-cost extruder for printing objects directly from recycled plastic flakes instead of using filament.

Trash Printer - Recycled Plastic 3D Print Head

A general purpose robot joint using a cycloidal gearbox and an ODrive modified to support active compliance

3D Printed Robot Joint with Active Compliance

Project to build the first working replica of the 1987 Soviet concept design.

SPHINX (СФИНКС) Home Computer System

Use a Raspberry Pi to build an EV charging station

Raspberry Pi EVSE Hat

Scalable swarm robot platform using ESP32 MESH capabilities and custom IR location

Swarmesh NYU Shanghai

Rodolfo Rodolfo

Hardware Hacking of Accu-Chek Performa Insight

Hardware Hacking of Accu-Chek Performa Insight

EthicalHacker523

The 2017 Hackaday Prize

Z-Wave development board Z-Uno + Touch pad detector chip TTP223 + Livolo glass + Batteries CR2032

Create Z-Wave capacitive touch switch on batteries

Step-by-step instruction on running the Google Chrome browser on Raspberry Pi using ExaGear Desktop

Run Google Chrome on Raspberry Pi

Let's Shrink Arduino Projects, Robotics and Automation You all did with Arduino UNO. Now There is Shrinkified Version Here!

BABYDUINO: SHRINKIFY YOUR ARDUINO PROJECTS!!

Transfer images over Bluetooth between an Arduino and an Android phone.

Bluetooth Camera with Arduino UNO

A small autonomous robot which will “see” and follow the line and take decision when it sees a turn by itself.

Simple Line Follower using Arduino

By combining 3d parts, gyro, and a stepper, I made a programmable foot pedal for my cheap GTAW welder! General remote knob turner.

3d Printed knob turner - remote TIG amp control!

DIY Arduino Soldering Robotic Arm

Automated Soldering Robotic Arm

The 2017 Hackaday Prize

Control electronic devices with Google Assistant using IFTTT and a Pocket C.H.I.P./Raspberry Pi

Google Assistant DIY Home Control

Provides automation for a Fermax 4 + N Electronic Door Entry System

Northcliff Home Automation Door Intercom Monitor

Allowing you to create user interface prototypes that combine hardware and software interface elements.

UX Prototyping Platform for IoT/Hardware Projects

Lennart Hennigs

I control appliances when I move this Infinity Gauntlet

Infinity Gauntlet Controlled Home Automation

View all

Bits