0%

0%

Lithium ION

A passionate electronics DIY boy, Embedded and programming.

United States

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 03/10/2022.

My Projects

Taking a safe side, using low DC voltage in high power mode we can design a suitable hot plate for our SMT projects.

PCB Soldering reflow hot Plate! A good Idea?

Yep, a Nano with c type and compatible drivers is what I want for my projects. Get it now on PCBWAY the clone board

My own Arduino Nano Microcontroller board

Hard to say the price/performance of desktop raspbian system YouTube video performance. Yet playable and good to go.

YouTube on Raspberry pi 4 with 8GB RAM

Small USB to Serial programmer module, with Type C port and having compatibility with Arduino micro-controller.

Arduino serial Programmer CH340N

This is like big boom in small packet, this amplifier comes with deep bass, clear sound without noise and humming. just TDA series

50Watts Audio Amplifier using TDA7265

Bench power supply is the used to test every electronics circuit. To make different readings according to variable voltage/current.

Variable Current/Voltage DC power supply

View all 15 projects

Projects I Like & Follow

A general purpose robot joint using a cycloidal gearbox and an ODrive modified to support active compliance

3D Printed Robot Joint with Active Compliance

Building and tinkering with crystal radios goes back to my childhood of the late 1960's and coming round again.

Shortwave Crystal Radio - A blast from my past

Hackaday Prize 2019

FiberGrid is a sensor framework for robotics

FiberGrid

programming Arduino Nano through Bluetooth

Use ESP32 as the MCU of motherboard for 3D printer.

CNC,3D printer motherboard,ESP32, 8 motors

Clock made of 512 Led's

Clock 512

Simulator for the VT100 hardware. Running inside Gardi's 3D model.

VT100 simulator and 3D printed replica

how to setup Phabricator on a raspberry pi 3B+ with a RAID on usb sticks to store the data somewhere else than on the SD card

Phabricator on raspberry pi

Nathann Nathann

Learning about electromagnetic induction can be illustrated by building a simple wireless energy transfer project that will light up an LED.

Wireless Energy Transfer build

G. Rosa G. Rosa

A cute colour-changing LED tiara.

Circuit Sculpture LED Tiara

Alexandra Covor

How to make a relatively simple All band DSP Radio Receiver with a color touch display which is based on the Si47xx series chip.

DIY Si47xx All Band DSP Radio with 2.8 inch touch

mircemk mircemk

Enjoying TV with a smart Hi-Fi or speaker? Use your TV IR remote to control volume, instead of having the other one always around.

SpeakerIR

A remote control differential drive robot car where the linear & angular velocities of the are controlled using a PID control system.

Remote Control Differential Drive Robot Car

Make IoT-based Smart Home Automation using Multiple ESP32 NodeMCU ESP8266 networks to control all the home appliances with Blynk & Switches.

IoT Project Using ESP32 NodeMCU Network With Blynk

In this tutorial we are going to make a simple IR Remote Control Relay Module Switch using TSOP1738

Infrared Remote Control Relay Module Switch

Compact clock has a variety of functions: Perfect time, Alarm, Measurement of temperature, humidity and atmosphere pressure indoors, etc.

LW-Clock

In this project I build a smaller version of my previous GNSS module. The main features are: LiPo battery, USB, active antenna, bluetooth

GNSS module 2.0 - GNSS via Bluetooth

The Raspberry Pi 4 8GB looks to have received a small SoC upgrade...

The Raspberry Pi 4 8GB Receives a Secret Update

kamaluddin Khan

View all

Bits