0%

0%

Luke

Making the world a better place.

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 02/10/2020.

My Projects

Keep compatibility with existing paper filters and hardware, but replace the leaky cap and tube with glass, so it won't wear out.

Aeropress Coffee Maker Sustainable Glass Upgrade

Projects I Like & Follow

A controller for LCD/OLED screens with MIPI DSI interface. Arduino shield format, HDMI-to-DSI adapter & built-in framebuffer.

MIPI DSI Display Shield/HDMI Adapter

Follow for the 'Hacklet' and latest news about hackaday.io

Hackaday.io Project

The 2017 Hackaday Prize

An open, superior, low cost alternative to FDM 3D printing that takes advantage of high res LCD technology and modern curable resins.

Low Cost, Open Source, LCD based SLA 3D Printer

Customizable OLED keyboard that adapts to the apps you use

Keybon – Adaptive Macro Keyboard

3D printing, with lasers!

SLS 3D Printer

A sketch to turn your Arduino into a 4MHz 6 channel logic analyzer.

Arduino Generic Logic Analyzer

Hackaday Prize 2019

Ardunio-Compatible M0/Zero/SAMD21 with FET Driver, MOSFETs, Absolute Magnetic Encoder, USB and RS485 comms. ~$US50

Brushless Actuator (Arduino-Compatible)

paul-gould Paul Gould

A general purpose robot joint using a cycloidal gearbox and an ODrive modified to support active compliance

3D Printed Robot Joint with Active Compliance

tim-wilkinson Tim Wilkinson

The 2015 Hackaday Prize

A low cost, full featured open source, industrial camera

Open Source Industrial Smart Camera

The 2015 Hackaday Prize

Firefly is a low-cost, modular flying robot for first responders that uses intelligent, nature-inspired algorithms to navigate autonomously.

Firefly — A Low-Cost Flying Robot to Save Lives

mihir-garimella Mihir Garimella

2021 Hackaday Prize

Waste plastic turned into raw material for 3D printing.

Direct Granules Extruder, FDM prints from powder

norbert-heinz Norbert Heinz

3d printed 40:1 Cycloid gear actuator module using Tarot 4008 (330kv) motor and MJ-VESC Circular Type Motor Controller Inside.

(40:1) 3D Printed Cycloid Gear Actuator Module V2

dongil-choi Dongil Choi

A 3D printed robotic leg, inspired by Boston Dynamic's Spot Mini robot. Aimed to balance form and function

3D Printed Quadruped Leg

3d printed 27:1 Cycloid gear actuator module

(27:1) 3D Printed Cycloid Gear Actuator Module V1

dongil-choi Dongil Choi

This solution has a number of unique benefits, a sensor platform with webserver, powered over Ethernet, accessible and programmed by browser

IoT Ethernet Sensor using Power over Ethernet

Optically Isolated USB to Serial Adapter. Up to 2Mbaud. 1.8-5V logic. No electrical connection between your device and the USB port.

Optically Isolated USB-UART Adapter

Breathing new life into a Stratasys Dimension 768 with a Smoothieboard 5X

3D printer brain retrofit

I will test the usability of the RF Explorer 3G+ IoT module from seeedstudio

Basic spectrum analyser with RF Explorer 3G+ IoT

dorijan Dorijan

View all

Bits