0%

0%

Queadlunn

Tinkerer and maker in the NW US.

Portland, OR

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

Tumblr

This user joined on 04/12/2018.

My Projects

A multi-mode scanner and data logger based on Adafruit Feather & Arduino

Science Tricorder by Olympus Heavy Industries

Projects I Like & Follow

Hackaday Prize 2019

A set of smart dice, the same size as traditional ones, full of LEDs and Bluetooth-enabled.

Pixels

The 2018 Hackaday Prize

AMS's new AS7265X 3-chip set promises a compact, 18-channel, 20 nm FWMH spectrometer for less than $25

Compact, $25 spectrometer

Documenting my experiments with the FLIR Lepton 3.5 thermal imaging camera.

Lepton 3.5 Thermal Imaging Camera

Hackaday Prize 2019

Opensource, inexpensive, mobile thermal camera for use in electronics, home inspection, non-contact thermometer, heat distribution and more.

Open Thermal Camera

Or how I try to create an exact mechanical (and functioning) replica of the Apollo Guidance Computer DSKY

Accurate Apollo DSKY Replica

Hackaday Prize 2019

Not your granddad's Geiger Counter

DIY Scintillation Detector

Design and develop a tank with additively manufactured thread and re-using filament spools as wheels

The Innovation Tank -3D Printed Treads-

The goal was to create a Tricorder as seen on Star Trek The Next Generation, as close to the real thing as possible

PiCorder TNG

A design for a compact, comfortable, reusable face mask that seals to your face and has replaceable air filters that are easy to procedure.

Covid-19 3D Printed Face Mask

Hackaday Prize 2020

A Raspberry pi UMPC. An open platform device to use and fit your project .It is fully open-source hardware. So you can hack it as you wish

mutantC v3 - modular and powerful handheld PC

goal: build a photo realistic and functional tricorder from tng. this means creating custom PCBs w/ chips, firmware/software, and a chassis.

Real Tricorder: With Scanny Bits (TNG)

Tells the time in both our "surface" system and in the "D'ni" time system used in the Myst games. Featuring custom 25-segment displays

25-Hour Digital Myst Clock/Chronometer

RIUM+ (Mike Ando) RIUM+ (Mike Ando)

3D printed ball screw actuator focusing on minimal cost.

3D Printed Ball Screw Actuator

A super-simple device for dispensing pre-measured food (for pets or research) at regular intervals throughout the day

SnackClock

Motion, sound, and light interactive LED sculpture powered by the Pixelblaze controller

Glow Flow

Hackaday Prize 2019

21st century vampire hunting weapon: repeating electromagnetoelastic compound crossbow with night vision

AFD Nightstalker

A handheld interface from the future or past.

DSKorder

Not much more to say

Testing Ambient Light Sensors

View all

Bits

Kris Winer wrote 05/16/2018 at 23:04

Thanks for liking my $25 Spectrometer project!

Are you sure? yes | no