0%

0%

Jon Random

Student

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 08/29/2018.

My Projects

I am trying to build a verily cheap LoraWan gateway with a ESP32 MCU.

ESP32 Lora Gateway

This board is based on the TI TPS63070 which is a buck-boost converter chip. It boosts a high range of voltages to 3.3V or 5V.

TPS63070 DaughterBoard

The LCD of my ART SGE MACH II was a bit dim. Since I had a generic 1602 LCD(for Arduinos and stuff) on hand I decided to swap them.

SGE MACH II Repair

I made 5 RGB LED light tubes, made to look like fluorescent tubes. Originally these were made for a music video as a background decoration.

RGB LED Light Tubes(fluorescent style)

Projects I Like & Follow

The 2018 Hackaday Prize

The development of a dedicated hardware MIDI controller for the Turnado audio FX software plugin.

Turnado Hardware MIDI Controller

liam-lacey Liam Lacey

The 2018 Hackaday Prize

Tiny robot for Hacking and EdTech.

Skoobot

bill-weiler Bill Weiler

Hackaday Prize 2019

Very new chip by Microchip(Atmel) ATmega4809 has a very unique CPLD like logic and also promised to be applied to next Arduino, why not try!

ATMega4809 developing board project

A low cost bed upgrade that adds a second slave heater to allow the bed to reach 110C and also makes the bed flatter and more rigid.

Monoprice Mini 3D Printer Bed Upgrade

Charlieplexed LEDs 3D-soldered together to make blinky platonic solids!

LED Polyhedron

The 2017 Hackaday Prize

Emergency Button for 7$ based on ESP8266 Wifi board

Emergency button : Reliable, Inexpensive & Design

jeanperardel jean.perardel

The 2015 Hackaday Prize

Home automation has been in vogue lately, but adding it to an old house can be quite the mess. fHome is a shot at solving that.

fHome, a cheap and easy home automation system

gabriel Gabriel

Open Source SHRED-Buddy3D UPcycler turns leftover filament bits, bottles & fishing line into pellets for 3D printing.

3D Printed Open Source UPcycler : SHRED-Buddy3D

venture-bit Venture Bit

The 2017 Hackaday Prize

Networked energy-metering nodes (at 10A 85-265VAC) nodes for home and building automation. And smart capacitive light switches, too!

Networked energy metering and home automation

Cheap WiFi Module for Internet of Things (IoT) projects

ESP8266 Arduino Tutorial and Review

UV Exposure Unit reproducable in every Hackerspace with a Laser-Cutter.

UV Exposure Unit

The 2015 Hackaday Prize

The kit development aimes at designing a universal training board that can cover a wide range of experiments

Comprehensive Laboratory Developme Kit for AVR MCU

Using new technology to bring an old 4 axis DC robotic arm back to life

RobotResto: Restoring a 4 Axis Arm

The 2017 Hackaday Prize

255 sounds wav pcm FX sound player

Talking robot

The Personal Robot

Kibitech

A 3d printed version of the NaBi robot developed at UCLA

NaBi a sideways walking robot: 8BitRobots

tim-wilkinson Tim Wilkinson

A PCBA designed to make long distances low power IOT applications possible.

Wave One Sub 1Ghz IOT Sensors

nicholas-johnson Nicholas Johnson

The barometric control of the drone is lagging if there is any wind outside. So I decided to modify it.

Syma X56W barometric mod

View all

Bits