0%

0%

Ryan

learner, optimist, inter dimensional portal jumper ;)

Right here, right now

Following Follow me

Similar accounts worth following

This user joined on 08/18/2021.

Projects I Like & Follow

A near-Arduino Nano form factor and Arduino compatible board based around a "better" and cheaper AVR MCU (currently an ATtiny1616)

The Launchpad - A $2 Arduino Nano alternative

clyde-d-corpuz Clyde D. Corpuz

Quick way to start with MCUs

Adventures with a STC89C52 development board

ken-yap Ken Yap

Medium-sized 12-DOF Quadruped Robot inspired by MIT Cheetah and Boston Dynamics Spot Mini

NOMAD Quadrupedal Robot

implemented-robotics Implemented Robotics

A custom vacuum tube pre-amplifier featuring remote control and a nixie tube volume level display

Vacuum Tube Preamplifier with Nixie Display

justin-scott Justin Scott

Hackaday Prize 2020

1/6 scale WWII Hetzer. Radio Control, scratch built, drone camera, paintball gun cannon, drive is a pair of electric bicycle motors

1/6 Scale WWII RC Tank

bret-tallent Bret Tallent

In a few steps we build a basic ultra low power WiFi home automation system by using Raspberry Pi, IOT Cricket module(s) and MQTT protocol

Ultra low power WiFi home automation system

Hackaday Prize 2020

Open source drone platform for aerial sowing of seed balls, for a revolutionary and efficient, automatic reforestation.

Dronecoria: Drone for Aerial Reforestation

My son asked: But how does that power can compute?

Relay ALU

Combine two DJI FPV goggles into a single pair of stereoscopic FPV goggles.

3D FPV Goggles

nathan-peterson Nathan Peterson

In this project, I upgraded my 3D printer to be able to capture time-lapses of the prints without any additional electronics.

3D Print Time lapses Without Octoprint

An NFC-enabled music player designed for kids to be able to pick their songs, built the hardest way possible

NFC Bose Wave Player

2021 Hackaday Prize

How to make an IoT-based Smart Home with Arduino IoT Cloud & Alexa using NodeMCU ESP8266 to control 4 home appliances with voice commands.

Arduino IoT Cloud ESP8266 NodeMCU Alexa Smart Home

Hackaday Prize 2020

Connected ECG monitoring and reporting system

My Heart

Robot Frog Prototype made from a flexible PCB

FlexFrog

carl-bugeja Carl Bugeja

Shield for NUCLEO-F103RB, it's a logger of pulses received from four external devices. Has WiFi, sdCard, keyboard and LCD.

Data Logger Shield

AGH mechatronics project.

Autonomous parking car

A 3D Printed Mechanical Seven Segment Display: Design and Test.

A 3D Printed Mechanical Seven Segment Display.

greg-zumwalt Greg Zumwalt

newest edition of its Power over Ethernet (PoE) HAT. The Raspberry Pi PoE+ HAT outperforms its predecessor by adopting the 802.11at PoE+...

The Raspberry Pi PoE+ HAT Has Been Announced.

View all

Bits