0%

0%

vic.paulsen

An oldie but interested in many technical items

Texas

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 10/24/2020.

Projects I Like & Follow

The LittleArm is a 3D printed Arduino robot arm created for Makers and STEM education

LittleArm: 3D Printed Arduino Robot Arm

The 2017 Hackaday Prize

Speeding up Search & Rescue by locating the position of emergency radio beacons using an autonomous drone.

Bloodhound: Autonomous Radiolocation Drone

phil-handley Phil Handley

Hackaday Prize 2019

Ardunio-Compatible M0/Zero/SAMD21 with FET Driver, MOSFETs, Absolute Magnetic Encoder, USB and RS485 comms. ~$US50

Brushless Actuator (Arduino-Compatible)

paul-gould Paul Gould

Universal enclosure that can be used as a lab power supply, soldering station or combination of two.

Modular PSU & Soldering station

An open source HW & SW motor controller for fine-grained control of brushless DC motors for robotics.

SmoothControl

matthew-moore Matthew Moore

The 2018 Hackaday Prize

Using an esp8266, arduino nano, a salvaged usb power supply, and a couple relays you can automate anything

Home automation on the cheap

The 2017 Hackaday Prize

Fully 3D-printable electric longboard drivetrain with built-in idler system.

3D-Printed Electric Longboard

yowhwui yowhwui

The 2016 Hackaday Prize

Using the Arduino Uno, a DC motor controller, a DC motor power supplies, and sensors, I have made my chicken coop automated.

Chicken Coop Automation

Replacement PCB for TS100, adds USB-C PD to every hackers favourite tool!

Otter-Iron - TS100 USB-PD hardware mod

jana-marie Jana Marie

The 2018 Hackaday Prize

Basically you can turn regular fishing line and nichrome wire into a linear actuator that can contract much like a human muscle.

Material Linear-Actuator for Robotics

Brandon T. Wood

A slightly unsafe journey into alternative fuels.

Run a small engine on WATER! Ends with a BANG!

TheThriftstoreHacker

The 2018 Hackaday Prize

UNMANNED GROUND VEHICLE, Compatible with Arduino

M1 Rover

ahmed-azouz Ahmed Azouz

This project shows the build of a 150mm DIY 4th axis (based on a harmonic drive reduction) with an electromagnetic disk brake.

DIY CNC 4th Axis with Brake

This smart relay can sense the room temperature and sunlight to turn on and off the fan and light bulb. You can monitor the same from mobile

IoT Based Home Automation With Blynk and NodeMCU

Open Source Hardware for IoT Embedded Applications

nRF52832 Micro Development Kit

boktech BokTech

3D printed Chair designed and 3D printed in SelfCAD. https://www.selfcad.com

3D Printed Chair

selfcad SelfCAD

A multi-thread enabled N-Queens benchmark for hardware running Python.

The N-queens Problem in Python

mauro-riva Mauro Riva

The goal of this workshop will be to give an introduction to the open-source Meta_Processing and Meta_Javascript programming environments.

Remoticon: Creative Code Experiments

View all

Bits