0%

0%

Donald H Locker

Studied Mechanical and Electrical Engineering at University of Michigan. Have written control, simulation, and data acquisition (real-time) systems.

S.E.Michigan, USA

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 01/05/2022.

Projects I Like & Follow

Follow for the 'Hacklet' and latest news about hackaday.io

Hackaday.io Project

The 2016 Hackaday Prize

Hooking up a DIY spectrometer to professional spectroscopy software

Universal software for DIY spectrometers

friedrich-menges Friedrich Menges

Active mixing, fused filament fabrication 3D printer.

Arcus-3D-M1 - Full Color Filament Printer

daren-schwenke Daren Schwenke

A general purpose robot joint using a cycloidal gearbox and an ODrive modified to support active compliance

3D Printed Robot Joint with Active Compliance

tim-wilkinson Tim Wilkinson

The 2016 Hackaday Prize

Over the last 10 years or so my personal home automation controller has grown and grown.

Home Automation Console.

Official Hackaday Prize Entry

Home automation system with video surveillance that indicates state by tweet.

Home automation system with Twitter

2021 Hackaday Prize

An electric scooter that can be made entirely from printed parts and off the shelf components without any power tools!

RepRaTS 3D Printable E-Scooter

james-dietz James Dietz

Interface a Pi Zero directly to a Commodore 64 via User Port and IEC. Give your C64 a Linux upgrade.

Raspberry Pi Zero W / Commodore 64 Interface Board

leif-bloomquist Leif Bloomquist

Usb phyton controlled heated bed for M3D 3d printer, making abs printing possible

Heated Bed for M3D 3d Printer

TheKnob - the sound volume control knob made of concrete, with RGB LED lights.

Control your audio with theKnob

brainhub-lab BrainHUB Lab

Small (hifi/stereo) pre-amp with teensy3.2 + audioshield

Teensy audio pre-amp module

marcell-marosvolgyi marcell marosvolgyi

How you can get multi-connect and remote access to USB Dongle

Donglify - Share USB Key Software

A PCB milling machine with automatic toolchanger that doesn't cost €10k

Fully automatic low cost PCB milling machine

Emulate a small size ROM with a RAM and Arduino with Intel-HEX interface

ROM-emulator

fjkraan fjkraan

A smart ESP32 powered Home Automation System. It could be embedded in switchboards of your house.

ESP32 powered Home Automation System

akshay-baweja Akshay Baweja

Practical implementation of home automation using LoRa technologie in comparison to other technologies.

A home automation architecture based on EFB-REV1

A 3D printed wireless EMG and FMG wearable using a raspberry pi zero w

Raspberry bioamplifier

martijn-schouten Martijn Schouten

Bluetooth is built into the Raspberry Pi and may be used for communication as well as sending and receiving data.

Using the On-Board Bluetooth on the Raspberry Pi 4

Bits