0%

0%

drbsin

I'm an Electronics Hobbyist

India

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 05/06/2020.

Projects I Like & Follow

In this period of isolation, I'm trying to build an oximeter with parts already in house. An oximeter is made by two leds and a photodiode.

Oximeter do it yourself

giulio-pons Giulio Pons

A dual head PNP machine that uses Openbuilds hardware, a Smoothieboard controller, dual camera vision, automatic/drag feeders, and OpenPnp

Pick and place machine - Smoothieboard/OpenPnp

Hackaday Prize 2019

An open-source Arduino compatible remote controller (transmitter) with many customization options for robots and drones.

Alpha V1: Open-Source Remote Controller

alireza-safdari alireza safdari

Hackaday Prize 2019

An open-source four-legged robotics platform

Spike, the Robot Dog

michael-g Michael G

ESP32 runs FabGL to produce VGA display

ESP32 VGA PS/2

land-boardscom land-boards.com

132 APA102 LED panels, 680 pixels per panel, 90,000 pixels, 300sqft, 4 Spartan 6 Mojo FPGAs

HDMI to FPGA to APA102

24-bit stereo DAC which is specially built for Raspberry Pi boards. This R-2R DAC delivers the clear audio output with minimum configuration

24-bit Stereo Audio DAC for Raspberry Pi

dilshan-jayakody Dilshan Jayakody

LoRa 2.4Ghz module used in full duplex mode, sending/receiving MavLink telemetry data

LoRa 2.4 Ghz for drone telemetry

akio-sato Akio Sato

Control and automate your electrical appliances from long distances(Kms) without the presence of the internet. This is possible through LoRa

Control Home Appliances Over LoRa | LoRa Remote

akarshagarwal98

A MicroPython gaming system featuring a Wemos D1 mini, OLED display, joystick, buttons, fancy LEDs and a buzzer.

GamerGorl

brian-wagner Brian Wagner

A Arduino alarm clock utilizing the RTC module DS3231.

Arduino Alarm Clock

nat-souza Natã Souza

Use Raspberry-Pi DPI hardware to drive four chains of RGB LED panels.

Improved Raspberry-Pi RGB Matrix Driver

Robert Rouquette

Setting up RFID on a Raspberry Pi using Microsoft IOT Core.

RFID on Raspberry Pi

Making an accessory using MXChip IoT Dev Kit. It is a versatile board with many sensors. It can use Azure functions and be trained. WIP

MXChip IoT Dev Kit

artbyphysicistkitty

This is a simple Arduino shield for Nimbelink Skywire cellular modems. They all have the same pinout, so the modems are interchangeable.

Arduino Shield for CAT M1 and NB-IoT Modems

nootropic-design nootropic design

1. Successful in europe (unheard of in US/canada) 2. Reduces ICU and MD burden 3. Fairly easy and cheap to manufacture

CPAP Helmet non-invasive ventilation

Every car should have this.

FINALLY! Car Wipers Sync to Music (See Video)

ian-charnas Ian Charnas

A quick look at the new Cypress PSoC 6 boards and getting them connected to AWS IoT services

Cypress PSoC 6 and AWS IoT

View all

Bits