0%

0%

gatt427

Mechanical Engineer, enjoys computers, digital electronics, aviation, control systems, etc.

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 04/19/2021.

My Projects

Turning a 3C10439 Palm Portable Keyboard into a Bluetooth keyboard.

Palm Pilot Bluetooth Keyboard

Projects I Like & Follow

The 2018 Hackaday Prize

This motor driver is able to control a motor using PID by I2C. Taking precise control of a motor have never been so easy.

Smart Motor Driver for Robotics

danny-fr Danny FR

Takes 3D surface scans at close range. It is simple to construct as it uses off the shelf hardware and software.

3D scanner

The 2015 Hackaday Prize

Small USB unit which simulates keyboard and generates, keeps and types up to eight passwords

Hardware password manager

voja-antonic Voja Antonic

The 2015 Hackaday Prize

PICkit can be used as a PIC Programmer, Serial to USB converter, Logic Probe, Logic Analyzer, but also as an AVR Programmer for Atmel MCUs

Microchip's PICkit 2 as an Atmel STK500 programmer

A fully hardware debounced rotary encoder.

Hardware Debounced Rotary Encoder

Use a Kodak projector and DSLR camera to automate digitizing slide photography

Kodak Slide Projector Scanner

bryan-howard Bryan Howard

Experimental case testing 3D printed "waterproofing" and water resistance.

Water Resistant 3D Printed Enclosures

The 2015 Hackaday Prize

A home automation box that allows you to connect any device and be controlled by any device and optimizes electricity consumption

Beaglebone Black Home Automation

ansaf-ahmad Ansaf Ahmad

uGFX was written for use with makefiles. Using it in arduino is possible with minimal effort, though. Here's how.

using uGFX in Arduino

Connect all needed electronics to NodeMCU, add life to them with a help of programming, install HomeAssistant on PC and let's roll!

Home Automation With NodeMCU, HomeAssistant & MQTT

Add a second brain to your Arduino Mega

RetroShield for Arduino Mega

A self-igniting candle implemented using AVR and PIC microcontrollers

AVR vs PIC: The case of the candle

thierry Thierry

Hackaday Prize 2019

An open-source four-legged robotics platform

Spike, the Robot Dog

michael-g Michael G

Clueless, broken robots thrive on Genetic Algorithms and Procedural Generation

IQ Zero: Evolving Unprogrammed Robots

die-master-monkey Die, Master Monkey!

The 2017 Hackaday Prize

Very small robots with features equivalent to their larger counterparts. For classrooms, robotics labs and more!

Micro Robots.

joshua-elsdon Joshua Elsdon

You may see it's just a stickered chip? NO! This is totally self-contained "mod-chip"

Minimal and self-contained ATmega1284P "mod chip"

Scalable swarm robot platform using ESP32 MESH capabilities and custom IR location

Swarmesh NYU Shanghai

rodolfo Rodolfo

In a few steps we build a basic ultra low power WiFi home automation system by using Raspberry Pi, IOT Cricket module(s) and MQTT protocol

Ultra low power WiFi home automation system

View all

Bits