Close
0%
0%

Andrew Quinn

Some guy from NZ into airplanes, horses and electronic stuff.

New Zealand
Following
Send a private message
Similar accounts worth following
4 Followers
42 Following
2 Projects
33 Likes
andrew-quinn
Send a private message

This user joined on 09/19/2015.

1k
544
0
17
Radio Shack Expansion Interface Alternative
Project Owner Contributor

TRS-80 Model 1 FreHD Expansion Interface

andrew-quinnAndrew Quinn

1.2k
23
2
16
Interfacing a FreHD Hard Disk Module to a Kaypro 4/83 and Kaypro II
Project Owner Contributor

Kaypro SSD Hard Disk

andrew-quinnAndrew Quinn

14.2k
90
24
80
PDP-11 compatible motherboard in mini-ITX form factor
Project Owner Contributor

PDPii

shaosSHAOS

13.5k
6.8k
18
151
Make cooler robots, faster and with less effort.
Project Owner Contributor

BowlerStudio: A robotics development platform

kevin-harringtonKevin Harrington

9.7k
4.4k
2
31
Project Owner Contributor

WeatherPi - Solar Powered Raspberry Pi Station

switchdoc-labsSwitchDoc Labs

9.3k
5.2k
2
27
This is a demo project for my Bluetooth Low Energy Mesh Protocol using a simple nRF51822 based board
Project Owner Contributor

Bluetooth Low Energy Mesh Protocol

tim-wilkinsonTim Wilkinson

7.5k
5.6k
4
63
An opensource Web platform and cheap sensor hardware solution for the massification of Continuous-flow solution culture (hydroponics)
Project Owner Contributor

IoT to Feed the Next Billion

kestlerKestler

7.4k
4.4k
0
13
Project Owner Contributor

nrf24le1 Wiring Library

justinJustin

6.3k
4.4k
0
26
Pi Boy 3000 with Raspberry Pi and PiTFT of Adafruit
Project Owner Contributor

Pi Boy 3000 with Raspberry Pi

sabasSabas

5.3k
4.5k
2
29
Project Owner Contributor

Raspberry-Pi smartphone

esme-chloe-kealoha-dudoitEsme Chloe Kealoha Dudoit

4.6k
4.6k
12
33
Global two-way satellite communication for robotics and IOT sensors. Easy to use, GPIOs, telemetry, low power and web API provided.
Project Owner Contributor

IOTsatcom is IOT and robotics everywhere

fabio-balzanoFabio Balzano

3.3k
23
0
22
Putting together a minimal LSI-11/23 from boards & parts
Project Owner Contributor

Building a PDP-11

steve-tonerSteve Toner

2.1k
2.2k
0
7
This is a PID control box unit, useful for reflow ovens, anodizing equipment or anything else you want
Project Owner Contributor

PID Control Box

jupdykejupdyke

1.6k
1.6k
5
7
FLoRa is a project and ecosystem to bring IoT to the masses, particularly farmers and those in remote communities.
Project Owner Contributor

FLoRa - IoT for all...

andrewAndrew

1.2k
1.2k
2
11
Using an Raspberry Pi connected to a shortwave radio to monitor shortwave activity and produce an alert when there is activity on the radio.
Project Owner Contributor

Shortwave Radio Alert

tom-stilesTom Stiles

923
2.6k
0
7
an open hardware security device featuring Atmel's TPM and CryptoAuthentication ICs
Project Owner Contributor

openTPM

jose-torresJose Torres

859
856
3
12
balloon + rocket + lots of $, somehow = 1 kg payload satellite in orbit
Project Owner Contributor

DIY satellite launch

dylan-bleierDylan Bleier

733
69
0
4
Single-PCB "shield" for Cyclone II Mini-board to run retro-computing projects.
Project Owner Contributor

Multicomp FPGA Breakout

howard-jonesHoward Jones

590
3k
0
4
Biotech robot open source control (for skynet ??)
Project Owner Contributor

Perl Robotics:: module for communicating to Tecan

jonathan-cline-ieeeJonathan Cline IEEE

472
1.1k
0
3
Sending electronic devices in the air for cheap.
Project Owner Contributor

Low altitude flying electronics

miawtthiasmiawtthias

View all

Share this profile

Share

Bits

Send a private message to Andrew Quinn

Become cool instantly

Create your Hackaday.io profile like Andrew Quinn and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Report user as inappropriate

You are about to report the user "Andrew Quinn", please tell us the reason.