0%

0%

Tobius Daichi

Hi! I am an Electronics Engineer with an obsession of learning about new things and tech and things and more electronics. :D

Brisbane Australia

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 09/26/2017.

My Projects

Hackaday Prize 2019

3+ Axis motion using Raspberry Pi 3 or similar. Can be used for Cartesian motion or even more. Now with optional closed loop sensing!

Project 3+Pi

Hackaday Prize 2019

USB-C PD adjustable V&A output. Allowing you to have a portable power supply on the go!

StuPD (USB-C PD Adjustable Power supply)

2 x 6DoF + 2 x 9DoF Sensor module(s) for 4 point reference in 3D space. Optional Accessory for 3+Pi board.

"Spine" for 3+Pi

Projects I Contribute To

Hackaday Prize 2019

I didn't have enough to buy a Lab Bench PSU... So I made one.

OPEN Power

Projects I Like & Follow

The 2017 Hackaday Prize

A 2.5mm thick flexible smart watch with e-ink display, BT 4.0, and health sensors.

Flexible Smartwatch

Hackaday Prize 2019

High Power, High Performance 400V 300A 100+kW Motor Controller fully compatible with VESC®

Axiom: 100+kW Motor Controller

Marcos Chaparro

Hackaday Prize 2019

Modular Open Source Hardware Tablet that is easy to hack and can run a standard Desktop Linux Distribution (or Android)

DLT one - A Damn Linux Tablet!

Prof. Fartsparkle

Hackaday Prize 2019

I didn't have enough to buy a Lab Bench PSU... So I made one.

OPEN Power

Hackaday Prize 2019

The latest marlin had ported to stm32 board,everything works, stable and smooth,have BLTouch,etc.

Upgrade your 3D printer from 8bit to 32bit

A better-than-servo motor for robotics

Custom motor for robotics

I was inspired when I saw clock made by Humans Since 1982. One year ago I made one. Now it is time to share how I did it.

digital clock made of analog clocks

Hackaday Prize 2019

It's cheap, doesn't use a specialized heart rate AFE and can blink LEDs with your pulse :)

uECG - a very small wearable ECG

Ultimate Robotics

A 3D-printed holder for a spool of wire, with an integrated mechanism to straighten wires as they are pulled off the spool

Wire Spool Holder With Straightener

Hackaday Prize 2019

An homemade FPGA board with an Arduino STM32, "Multicomp" compatible

"The Thing": FPGA + STM32

A mixed reality shooting gallery using virtual reality tracking hardware.

Mixed Reality Room Scale Shooting Gallery

Hackaday Prize 2019

A feather-like STM32F4 with Arduino Compatible

MINHF4, An STM32F4 Arduino Compatible Board

minh7a6 minh7a6

Hackaday Prize 2019

A simple servo robot arm with 7DoF features motion-planning ability by Debian Linux, Robot Operation System and Arduino.

A 7DoF Arduino Arm for ROS

qq95538 qq95538

Step-by-step instruction on running Dropbox on Raspberry Pi using ExaGear Desktop

Run Dropbox on Raspberry Pi

Hackaday Prize 2019

An USB super speed Type C to Type A adapter which can extract the USB PD signal of the Type C port and use it e.g. for charging.

USB 3.1 Type C to Type A Adapter with PD

The 2017 Hackaday Prize

Low-cost modular MQTT devices

Spider, a Tiny Home Automation Hub

Batch Testing and Programming PCBs

AVR Parallel Programming Testbed

The 2017 Hackaday Prize

A script that automates the process of signing git sources via GPG

Simplifying Source Code Signing with GPGit

View all

Bits