0%

0%

Leonardo Cavagnis

Passionate Embedded System Engineer | IOT and AI Enthusiast | Technical writing addicted

Italy

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 05/12/2022.

My Projects

Building an inclination estimator system with Arduino Nicla Sense ME and Neuton TinyML

TinyML: Slope control for Robots with Arduino Pro

Leonardo Cavagnis

How to create a gesture recognition system with Arduino and Neuton TinyML

Ultra TinyML: ML for 8-bit microcontroller

Leonardo Cavagnis

Projects I Like & Follow

Hackaday Prize 2020

Cheap 3D printed 4 legged robot, that almost looks like boston dynamics spot but moves like a newborn.

DIY hobby servos quadruped robot

miguel-ayuso-parrilla Miguel Ayuso Parrilla

The 2017 Hackaday Prize

Miniature VT100 with all the bells and whistles

diy-VT100 - A Miniature hardware terminal

kuldeep-singh-dhaka Kuldeep Singh Dhaka

Step-by-step instruction to run Wine on Raspberry Pi (or other ARM) using ExaGear Desktop

Run Wine on Raspberry Pi

A software interface for the breadboard. Configures your prototypes without wires or other components.

The MetaBoard

Exactly as the title says, I built a bluetooth controller out of a SNES controller and dongle for use with Nintendo's mini classic consoles.

DIY Bluetooth SNES Classic Controller

sjm4306 sjm4306

Design and build of a small, portable, Bluetooth-enabled boombox

Bluetooth Boombox MkII

The 2018 Hackaday Prize

The idea is to take Raspberry Pi, current/voltage meter INA219, and visualize the data by the web interface.

Power logger with Raspberry Pi

2021 Hackaday Prize

Roamer is a self-charging, switch free, capacitor powered, wandering robot companion.

Roamer, the Self Charging Companion Robot

mike-rigsby Mike Rigsby

Demonstration of #MongooseOS application that implements internet button functionality using ESP8266 module and Amazon AWS IoT service.

Internet button on ESP8266 and AWS IoT in 2 mins

Hackaday Prize 2020

Social distancing at the edge

COVID19 Authorized Entry Using Face Mask Detection

rahul-khanna Rahul Khanna

Using red pitaya to create calibration tables

Using red pitaya for long time data logging

marcel-ochsendorf Marcel Ochsendorf

A quick look at the new Cypress PSoC 6 boards and getting them connected to AWS IoT services

Cypress PSoC 6 and AWS IoT

Recreation of the Limrose Compukit 1 from 1970.

Limrose Compukit 1

In this project, we are going to measure the current using ohm's law.

Digital Ammeter Using Arduino

hiotron hIOTron

This robot is designed for supporting human in some specific condition, by take advantages of its special rotating forward mode.

Brain controlled multifunctional rolling robot

haohong-wang Haohong Wang

Supplyframe DesignLab: 2022 Hackada…

Every year robotics teams have to build a new robot. But what happens to the old robot and all of it's parts?

Robotics Kit

Made a miniature R2D2 from PCB, it's powered by an Attiny85 and speaks ASTROMECH Phrases at 3-second intervals through a BUZZER.

R2D2 Mini Edition

arnov-sharma Arnov Sharma

Making headphones wireless using CSR8645 chip

Technics DH1200 Bluetooth Headphones

View all

Bits