Close
Following
106.9k 1.3k 99 676
A printable robot arm, a little bigger than the usual hobby servo once.
Project Owner Contributor

3D Printable Robot Arm

Andreas Hoelldorfer

48.3k 1.7k 26 209
Cheap, Small, Open Source Servo Controlled Robot Arm
Project Owner Contributor

MeArm - Your Robot

ben.phenoptix

47.1k 1.3k 14 122
Building an open source robot arm for makers and small businesses
Project Owner Contributor

5 Axis Robot Arm

Dan Royer

17.6k 192 8 47
A completely-open, scratch-built PUMA arm with 24" reach and 1lb payload
6.2k 619 8 30
A 3D printed, cast-aluminum, anatomy-based, Arduino controlled bionic arm that surpasses the human arm in functionality and feel.
Project Owner Contributor

NeoLimb

Amadon Faul

4.4k 327 9 20
A flexible, open source robot arm that grinds, pours, and serves only the best robotic brewed Coffee.
2.5k 22 0 15
open source standarized, 3D printable robotic arm, powered by ROS, with 500g lift capacity
Project Owner Contributor

hRobot

Hubert

2.7k 49 5 13
An inexpensive robot arm retrofitted with H-bridge motor controllers and closed loop control
2.9k 500 4 13
Small robot arm based on common hobby servos and pipe supplies.
Project Owner Contributor

Robot arm

Rue Mohr

1.5k 394 2 10
For years i wanted to make a humanoid robot. I am presenting my first milestone here - robot can walk in straight line.
Project Owner Contributor

10DOF humanoid robot

Jure Tuta

2.7k 52 0 9
a low cost advacned robot arm with 6 axis for light industrial use.
Project Owner Contributor

Sexy Six axis robot arm

sparten111436

1.7k 31 2 5
Ever wanted to create your own mosaic patterns? While putting up a tile backsplash I said, I want a robot for this!
Project Owner Contributor

Tile Pick and Place

jpcutler