Close
0%
0%

Pavel G.

Software engineer

Los Angeles
Following
Send a private message
Similar accounts worth following
7 Followers
17 Following
1 Projects
36 Likes
pavel-g
Send a private message

This user joined on 04/29/2020.

7.4k
58
0
36
Cheap 3d printed hi torque robot actuator with electronics
Project Owner Contributor

Hi torque 3d printed cheap robot actuator

pavel-gPavel G.

Robots

Robots

Curated by Pavel G.

1
0
147.6k
3k
81
614
Cheap 3D printed 4 legged robot, that almost looks like boston dynamics spot but moves like a newborn.
Project Owner Contributor

DIY hobby servos quadruped robot

miguel-ayuso-parrillaMiguel Ayuso Parrilla

95.3k
848
112
603
A high speed and high torque robotic actuator using low-cost brushless motors, custom controller, 3D printed parts and bearings.
Project Owner Contributor

3D Printed Robot Actuator

paul-gouldPaul Gould

59.6k
4.8k
19
107
My attempt to build a desktop arcade machine by 3D printing the cabinet and using Raspberry Pi 3 running RetroPie.
Project Owner Contributor

Desktop Arcade Machine : 3D Printed + RetroPie

christopher-tanChristopher Tan

32.7k
6.2k
30
188
An Off-the-grid messaging system.
Project Owner Contributor

Skrypt

taiwoTaiwo

21k
6.3k
10
75
The development of a dedicated hardware MIDI controller for the Turnado audio FX software plugin.
Project Owner Contributor

Turnado Hardware MIDI Controller

liam-laceyLiam Lacey

15.8k
3.1k
26
145
A compact modular design of the strain wave gear for general robotic applications.
Project Owner Contributor

Compact Strain Wave Gear Actuator(s)

leo-vuLeo Vu

10.9k
1.3k
0
21
The goal of this project is to create an Open-Source-Debugger for AVRs via Debug Wire.
Project Owner Contributor

DebugWire Debugger

jan-bJan B.

8.1k
63
8
46
3d printed 40:1 Cycloid gear actuator module using Tarot 4008 (330kv) motor and MJ-VESC Circular Type Motor Controller Inside.
Project Owner Contributor

(40:1) 3D Printed Cycloid Gear Actuator Module V2

dongil-choiDongil Choi

6.1k
54
1
42
3d printed 27:1 Cycloid gear actuator module
Project Owner Contributor

(27:1) 3D Printed Cycloid Gear Actuator Module V1

dongil-choiDongil Choi

5.2k
44
2
41
3d printed 8:1 planetary gear ratio actuator module with VESC firmware based circular motor driver
Project Owner Contributor

(8:1) 3D Printed Planetary Gear Actuator Module

dongil-choiDongil Choi

5.1k
5.1k
4
43
Self-Powered IoT Node for Environmental Sensing
Project Owner Contributor

SPINES Mote

macro-yauMacro Yau

4.4k
62
5
53
An affordable quasi-direct drive (QDD) actuator with steel gears.
Project Owner Contributor

SpryDrive

ben-bokserBen Bokser

4.4k
4.8k
32
51
A unique approach to 3D printing that injects curing resin into a gel. The rig is designed to be added to most hackable 3D printers.
Project Owner Contributor

Suspension 3D Printing

michaelMichael

4.2k
90
5
67
Open source robotic leg for development and education of biomimetic robotics
Project Owner Contributor

OpenLeg - Open Source Dynamic Robotic Leg

joey-byrnesJoey Byrnes

3.8k
84
1
64
A mid-size quadruped made with off-the-shelf + 3d printed parts.
Project Owner Contributor

Dante

778-labs778 Labs

3.4k
68
2
60
A ROS enabled highly dynamic quadruped robot
Project Owner Contributor

Quadruped Robot Tsuki

lingkang-zhangLingkang Zhang

2.8k
3.1k
0
15
An 8-bit TTL computer with 8 bits of address space.
Project Owner Contributor

Boxer-1 TTL Computer

boxerbombBoxerbomb

1.5k
1.6k
9
6
ATtiny84-based gamed of life on 8x8 LED matrix with manual setup of 1st generation.
Project Owner Contributor

Conway's Game of Life on ATtiny84

jean-franois-poilpretJean-François Poilpret

View all

Share this profile

Share

Bits

Send a private message to Pavel G.

Become cool instantly

Create your Hackaday.io profile like Pavel G. and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Report user as inappropriate

You are about to report the user "Pavel G.", please tell us the reason.