Projects G.Vignesh likes and follows

Sort by:

Follow for the 'Hacklet' and latest news about hackaday.io

Hackaday.io Project

Official Hackaday Prize Entry

A home automation solution that utilizes a Raspberry Pi server, 433MHz radios, and an Android app.

Low Cost Home Automation

daniel-hankewycz Daniel Hankewycz

The 2016 Hackaday Prize

Applying polymorphism to hardware enables users to do more with their devices while avoiding IoT pitfalls.

Polymorphic Hardware

trey-german Trey German

The 2016 Hackaday Prize

Visually impaired students can make great use of 3D prints to learn just about any subject, but their teachers need help making good models.

3D Prints for Teachers of the Visually Impaired

joan-horvath Joan Horvath

Official Hackaday Prize Entry

A monster flashlight containing a 100W 8500Lm led with big heatsinks and batteries. With morse function to tell the night goodbye.

Portable 100W led flashlight

yannick-gigawipf Yannick (Gigawipf)

A low cost bed upgrade that adds a second slave heater to allow the bed to reach 110C and also makes the bed flatter and more rigid.

Monoprice Mini 3D Printer Bed Upgrade

Neuron models including Izhikevich dynamics, chemical and electronic synapses, and STDP learning.

Spiking neural net in parallel FPGA hardware

bruce-land Bruce Land

Pavapro is tiny programmer you can bring anywhere. You can load binary file into it and bring/use it as you wish. And a bit more than that.

Pavapro - portable AVR programmer

jaromirsukuba jaromir.sukuba

Official Hackaday Prize Entry

Open automation system, starting with lights and occupancy sensing and expanding to encompass anything that has wires or electrical contacts

Home Automation System (to rule them all!)

Use your PIC-Projects on Mini-PCIe (USB/SMBus)

Mini-PCIe - PIC18LF2550 - DevBoard

RGB LED Lamp that I can control from my phone.

Bluetooth controlled NeoPixel lamp

This project as the title suggests is used to purify air using basic techniques and tries to utilise renewable energy resources in doing so.

Air Purifier Helmet

Produce a working Wozniak design blue box

WoZ Bluebox hardware recreation

cprossu cprossu

A Markov sequencer, with fractal 1/f transition probabilities, is combined with a two-voice, 16-bit FM synthesizer, running on a 8-bit MCU.

FM-synth, two voice, Markov sequence, music box

bruce-land Bruce Land

Official Hackaday Prize Entry

Programming and Electronics Learning Robotics kit, for students.

TurtlePi - Raspberry pi, Arduino Robot

Use the team chat to talk about your projects and find collaborators for whatever you are working on.

Hack Chat

Using an Arduino I made a Servo Motor move. When I put it on it's side it remended me of a Fish.

Simple Fish Robot

Official Hackaday Prize Entry

The open source 3D Printable Raman Spectrometer using a RaspberryPi and easy to find off the shelf components..

ramanPi - Raman Spectrometer

The 2016 Hackaday Prize

This is a synth that produces squarewaves in different frequencies. You can use it to make a pattern of maximum 8 notes.

8 note Step Sequencer

mathias-sundgren Mathias Sundgren

Augmented Reality Business Card.

Augmented Reality Business Card

edgaras-art Edgaras Art

A minimal board for PDIP ATmega 1284/644/32 MCU which interfaces easily to a solderless prototype board.

Student AVR board

bruce-land Bruce Land