0%

0%

manthan.gohel2671

Just here for learning new things!

Jamnagar

Following Follow me

Similar accounts worth following

This user joined on 06/19/2020.

Projects I Like & Follow

Hackaday Prize 2019

Creating a free & open source global IoT network, democratizing access to space by miniaturizing aerospace systems.

FossaSat-1, Open Source Satellite

julian-fernandez Julian Fernandez

An ongoing exploration and experiment about the use of small magnetic loop antennas for QRP (low power) Amateur Radio.

Magnetic Loop Antennas for QRP Amateur Radio

mark-dammer-mm0dqm Mark Dammer MM0DQM

A camera that tracks a person & counts reps using *AI*.

Auto tracking camera

lion-mclionhead lion mclionhead

This project uses 3D printing and a little lathe work to adapt an existing DIY RC aircraft create a Vertical Take-off and Landing craft

Tilt Rotor VTOL RC aircraft

extended control of heater/pump/blower, costs tracking and preview, alert up-on fault, LED lights add-on

Lay-Z Spa Remote Control

Hackaday Prize 2019

POV Fidget spinner which uses Enhanced PIC16 AngularTimer peripheral, Bluetooth Low Energy 4.2 link, LabVIEW PC application, touch button...

Persistence of Vision Fidget Spinner

matej-nogi Matej Nogić

Hackaday Prize 2019

Grasp is a robotic hand designed to to be assembled by a non experienced user and can be useful for different applications.

Grasp Bionic Hand

xavi-cano Xavi Cano

2021 Hackaday Prize

Our latest robot for telepresence and VR experiments.

Bástya 2.0 (work in progress)

Use Raspberry-Pi DPI hardware to drive four chains of RGB LED panels.

Improved Raspberry-Pi RGB Matrix Driver

Robert Rouquette

A project to design, build and fly a 3D printed high power model rocket air-frame, capable of flying with up to a K Class motor.

Fully 3D Printed Level 1-2 NAR Cert Rocket

Mitchell O'Connor

A small autonomous robot which will “see” and follow the line and take decision when it sees a turn by itself.

Simple Line Follower using Arduino

jithin-sanal Jithin Sanal

a cost $1, actually even less, solution for Bluetooth 4.1

<$1 Bluetooth 4.1 Solution

A site-area paging system with an Internet-facing front end.

The Wireless Badger

BLE interface for BOSS FS-6 pedals or similar using nRF52840

BLE page-turner / control pedal

This is going to be a long and hard project - and a really expensive one too. I'm happy to take you along for the ride!

(Exosuit?)/VR Controlled Bot

adam-jensen Adam Jensen

I love these vintage VFD tubes!

IV-18 VFD Clock

sjm4306 sjm4306

IRIS2 is a followup of IRIS project. It's a complete project of Raspberry Pi based Internet Radio with own 2+1 AMP HAT and spectrum analyzer

IRIS2 Internet Radio

Hackaday Prize 2019

This device is capable of detecting different kind of weapons like gun, knife, etc.

Weapon Detector - AI /Computer vision

View all

Bits