0%

0%

Ali Bagheri

Students in CE, interested in robotics and...

Following Follow me

Similar accounts worth following

This user joined on 12/26/2020.

Projects I Like & Follow

Hackaday Prize 2019

MIDI electronic portable practice hurdy-gurdy: It's always in tune.

The Digi-Gurdy and Digi[Nerdy]Gurdy

Takes 3D surface scans at close range. It is simple to construct as it uses off the shelf hardware and software.

3D scanner

Design and implementation of a low-cost, single-channel, EEG prototype circuit

Low-cost EEG circuit

The 2018 Hackaday Prize

Zn-Cu stomach acid based bio-galvanic cell powers a hacked activity tracker small enough to swallow and reconfigured as a 'smart pill'.

Stomach Acid Powered Smart Pill

curt-white Curt White

Use a Raspberry Pi to build an EV charging station

Raspberry Pi EVSE Hat

nick-sayer Nick Sayer

A cheap alternative to more expensive BLDC controllers, where only simple operation is required. More features may be added as required.

Modified ESC for Bidirectional BLDC Control

Hackaday Prize 2019

Building a robot car with a smartphone at its heart.

DeepRC Robot Car

piotr-soklski Piotr Sokólski

LoRa 2.4Ghz module used in full duplex mode, sending/receiving MavLink telemetry data

LoRa 2.4 Ghz for drone telemetry

akio-sato Akio Sato

The 2018 Hackaday Prize

Electromagnetic Lifting Module

ELM

I live in a rented flat and didn't want to shell out ~£200 for a Nest thermostat, so I decided to build my own.

Smart IOT thermostat

In this IoT project, I have made a WiFi and IR remote control relay module using an ESP8266 (ESP01) and Arduino with Real-time Feedback.

Arduino ESP8266 Control Relay with Blynk & IR

The 2018 Hackaday Prize

A low cost, open-source, universal-like remote control system that translates the user's spoken words into commands to electronic devices.

TV Remote Control via Offline Speech Recognition

cassio-batista Cassio Batista

AI Based Object Tracking Robot Using Arduino and HuskyLens

Arduino AI Object Tracking Robot

jithin-sanal Jithin Sanal

The main goal of this project is to design a Voice-Controlled Home Automation System without replacing the existing Switchboard.

IoT at just 7$ in your existing switchboard

A follow-up tutorial to Pi Project 001, where a RAM Copper Heatsink is now added to the back of the Raspberry Pi, providing greater cooling.

Raspberry Pi RAM Copper Heatsink Setup

A modular wearable prototype for supercon 2018

Hack/Mod/Wear

angela-sheehan Angela Sheehan

Bowie at Supercon '18! Join us to use the robot to clean up the park, then perform environmental sensor data analysis

Supercon: Environmental Robotics BioBlitz!

The project was created as a part of the Basics of Mechatronics course at AGH University of Science and Technology in Kraków.

Firefighter Robot - Finished

mechatronicproject10

View all

Bits