0%

0%

Devadath P R

I like to design and build stuff

Thrissur, India

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 04/17/2023.

My Projects

Supplyframe DesignLab: 2023 Hackada…

A machine that writes stuff for you- in your own handwriting- so you don't have to!

Homework Machine

devadath-p-r Devadath P R

Projects I Like & Follow

Small and simple software for plotting data from serial port

SerialPlot - Realtime Plotting Software

Hasan Yavuz Özderya

Follow for the 'Hacklet' and latest news about hackaday.io

Hackaday.io Project

Official Hackaday Prize Entry

I will be attempting to build a guided rocket using of the shelf parts

Guided Rocket

The 2017 Hackaday Prize

An open, superior, low cost alternative to FDM 3D printing that takes advantage of high res LCD technology and modern curable resins.

Low Cost, Open Source, LCD based SLA 3D Printer

Official Hackaday Prize Entry

Arduino powered rocket stabilization system for mid to high power rockets that gets rid of the pitch over and subsequent downrange flight

Arduino rocket stabilization system [UD: 7/14/17]

The 2015 Hackaday Prize

OSHW+OSS to enable the next generation of powered prosthetic limbs and exoskeletons. Let’s make humans faster/better/stronger!

FlexSEA: Wearable robotics toolkit

jean-franois-duval Jean-François Duval

Official Hackaday Prize Entry

A high availability Raspberry pi cluster for home automation purposes. Simple, low on energy, but very stable.

Raspberry Home Automation Cluster

michiel-spithoven Michiel Spithoven

A sketch to turn your Arduino into a 4MHz 6 channel logic analyzer.

Arduino Generic Logic Analyzer

Sofware usb host for connecting mouse , keyboard and joystick to ESP32

ESP32 usb software host

samsonov-dima Samsonov Dima

I am building an automated aquarium controller to fit into my home automation system.

Aquarium controller / home automation

The 2018 Hackaday Prize

This open-source, low-power LTE shield uses cutting-edge CAT-M technology and also integrates GNSS location capabilities!

LTE CAT-M1/NB-IoT Shield for Arduino

timothy-woo Timothy Woo

Single rotor, "human-safe", selfmade ball-drone with air vanes for position control

The Ball-Drone Project

benjamin-prescher Benjamin Prescher

Hackaday Prize 2019

LP3D is an (almost) fully lasercut, low component count 3D printer with all linear motion components cut directly into the frame.

LP3D: A fully lasercut kit 3D printer

The 2016 Hackaday Prize

A simple power socket that contains a relay, a temperature/humidity sensor, a motion sensor and that is manageable over WiFi

Home Automation Power Socket

david-davenne David Davenne

I rebuilt my Passap E6000 knitting machine so that I can now control not only the front but also the rear needle bed.

Passap E6000 rebuilt and replaced console

irene-wolf Irene Wolf

Embedded Machine Vision for Robots and Drones

OpenMV-DSP

iabdalkader i.abdalkader

This is an open source hardware, i made for use of build CNC printers.

Arduino CNC Shield

brijesh-sondarva Brijesh Sondarva

Expansion boards are designed to be easy to use in DIY IoT projects, low cost, reliable, saves the pain of cabling bread boards

STM32 Blue pill IoT expansion boards

View all

Bits