0%

0%

Mattias

Electrical Engineering student at UBC. Interested in control, systems, and robotics.

BC

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 06/09/2020.

My Projects

This is a 4 DOF 3D printable robotic arm that I am currently developing.

3D Printable Robotic Arm - ARManda

mattias Mattias

Projects I Like & Follow

Hackaday Prize 2020

Cheap 3D printed 4 legged robot, that almost looks like boston dynamics spot but moves like a newborn.

DIY hobby servos quadruped robot

miguel-ayuso-parrilla Miguel Ayuso Parrilla

Hackaday Prize 2019

A powerful, compliant actuator for legged robotics

OpenTorque Actuator

An Odrive + steppers based construction, with 5x 3D printed hollow shaft reducers and an internal CAN network.

Atlas - 6DOF 3D printed universal robot

damian-lickindorf Damian Lickindorf

Hackaday Prize 2020

Affordable, precise, integrated motion control for robotics

Tinymovr Motor Controller

Hackaday Prize 2019

Creating a free & open source global IoT network, democratizing access to space by miniaturizing aerospace systems.

FossaSat-1, Open Source Satellite

julian-fernandez Julian Fernandez

Faze4 is 3d printable 6 axis robotic arm . It uses stepper motors and 3d printed cycloidal reducers.

Faze4 Robotic arm

petar-crnjak Petar Crnjak

Single rotor, "human-safe", selfmade ball-drone with air vanes for position control

The Ball-Drone Project

benjamin-prescher Benjamin Prescher

Brushless motor controller for velocity and position control with wireless communication.

Dagor Brushless Motor Controller

david-gonzalez David Gonzalez

An Arduino controlled infinity mirror mask. You can even see while wearing it!

Infinity Mirror Scuba Mask

curt-white Curt White

The 2018 Hackaday Prize

Yet another open source platform for drones, but this one is fully integrated and uses the SAME70@300Mhz x2 + a Pi Compute Module

Open Source All-In Drone-Droni SAME70Pi (Kopernik)

laetitia-bel Laetitia BEL

The 2018 Hackaday Prize

A hardware and software balancing cart pole.

ZIPY : ZIPY Inverted Pendulum Yakshave

philip-zucker Philip Zucker

The 2018 Hackaday Prize

Basically you can turn regular fishing line and nichrome wire into a linear actuator that can contract much like a human muscle.

Material Linear-Actuator for Robotics

Brandon T. Wood

How to generate frequencies below 10Hz using a PC, an amplifier, and a handful of components.

Extreme Low Frequency Signal Generator

joseph-eoff Joseph Eoff

The 2018 Hackaday Prize

Using ninjaflex, I have revived a dead Phillips CD-i

3D printed belt for Phillips CD-i

Stranger Things themed desktop board / word clock

Stranger Board

The 2017 Hackaday Prize

a flexible controller based on the ESP32

HIVE

A small autonomous robot which will “see” and follow the line and take decision when it sees a turn by itself.

Simple Line Follower using Arduino

jithin-sanal Jithin Sanal

The 2018 Hackaday Prize

An open source modular system for learning, development and games.

DevBoy

nicolai-shlapunov Nicolai Shlapunov

View all

Bits