Close
0%
0%

Ahmed

My career is in industrial control systems, robotics for fifteen years. Currently work with Autonomous tech.

Tampere
Following
Send a private message
Similar accounts worth following
1 Followers
43 Following
0 Projects
0 Likes
ahmed
Send a private message

This user joined on 05/30/2019.

43.1k
1.8k
82
503
RepRap HELIOS is a highly printable SCARA 3D printer. It has an outrageous print area and can print on almost any flat surface.
Project Owner Contributor

RepRap HELIOS

nicholas-sewardNicholas Seward

35.7k
3k
11
197
Quickly identify radioactive materials with a pocket-sized ion chamber. Built from standard parts for easy manufacture and low cost.
Project Owner Contributor

Open Radiation Detector

carlos-garcia-sauraCarlos Garcia Saura

21.9k
6.9k
7
77
Speeding up Search & Rescue by locating the position of emergency radio beacons using an autonomous drone.
Project Owner Contributor

Bloodhound: Autonomous Radiolocation Drone

phil-handleyPhil Handley

19.7k
1.5k
15
125
Tiny robot for Hacking and EdTech.
Project Owner Contributor

Skoobot

bill-weilerBill Weiler

16.2k
11.4k
2
29
A portable Yagi antenna for working amateur radio satellites
Project Owner Contributor

WA5VJB ultra portable dual VHF/UHF Yagi

eliaElia

6.3k
946
12
11
ESP8266 Based air compressor controller with WiFi.
Project Owner Contributor

IOT Air Compressor

boris-van-galvinBoris van Galvin

5.5k
4.6k
6
29
Tiny IOT Solution based on Arduino& SIM808 GPS/GPRS
Project Owner Contributor

IOT- SIM808 GPS Tracker Based on Arduino

makerfabsMakerfabs

4.3k
4.2k
3
21
A 16x7-Segment LED Clock that syncs time from GPS satellites.
Project Owner Contributor

gps_clock

clewsyclewsy

3.3k
3.3k
4
38
This is a self balancing robot created by star wars fan, with autonomous behavior, FPV and remote control modes
Project Owner Contributor

Droid Trooper

victor-serranoVictor Serrano

3.2k
3.3k
0
10
LoRa 2.4Ghz module used in full duplex mode, sending/receiving MavLink telemetry data
Project Owner Contributor

LoRa 2.4 Ghz for drone telemetry

akio-satoAkio Sato

3.2k
3.2k
4
40
A MIDI controller with arcade push buttons and 32 RGB LEDs
Project Owner Contributor

MIDI Fighter

w4ilunw4ilun

3.1k
1.6k
5
23
STLs and instructions included
Project Owner Contributor

Building a Spitfire model plane with my son

marius-taciucMarius Taciuc

2.4k
2.4k
0
15
Experimenting with 3D printed tools.
Project Owner Contributor

3D Printed Opensource Tools

progressthProgressTH

2.4k
2.3k
1
13
Redundant IMU
Project Owner Contributor

Super IMU

laetitia-belLaetitia BEL

2k
2k
6
30
Early computer designers were cheap masochists. This front panel is much better yet could have been made 50 years ago !
Project Owner Contributor

Hardware assembler / EMUI

yann-guidon-ygdesYann Guidon / YGDES

1.8k
1.2k
0
10
My aim for this project is to create a slightly larger radio telescope, which is able to observe signals on the 21cm hydrogen line
Project Owner Contributor

Slightly bigger radio telescope

gonalo-nespralGonçalo Nespral

1.7k
1.7k
0
10
An open-source panoply of UAVCAN connected boards to enable smart sensors and actuators for modular robotics development
Project Owner Contributor

CVRA's Robotics CAN Ecosystem

salah-missriSalah Missri

1.6k
1.6k
1
8
Power up your ESP8266 with Arduino!
Project Owner Contributor

ESP8266 Arduino Tutorial, Part 2

alexanderAlexander

View all

Share this profile

Share

Bits

Send a private message to Ahmed

Become cool instantly

Create your Hackaday.io profile like Ahmed and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Report user as inappropriate

You are about to report the user "Ahmed", please tell us the reason.