Close
0%
0%

Roger Rabbit

I am a MAKER :) - I like to realise some of my ideas with the opportunities we have these days

Switzerland
Following
Send a private message
Similar accounts worth following
12 Followers
35 Following
9 Projects
131 Likes
roger-rabbit
Send a private message

This user joined on 12/23/2015.

13.4k
866
4
74
Revision 2 of tiny linear servo extender totally revorked and improved. Much easier to assemble, tight fit and robust design
Project Owner Contributor

3D-Printed Linear Servo Extender

roger-rabbitRoger Rabbit

997
19
4
19
3D-printed robot with peristaltic movement based on Arduino and servo SG92R
Project Owner Contributor

Robot walking like worm

roger-rabbitRoger Rabbit

2.7k
13
1
14
Porting the game collection from Daniel C. to the new and hyped RPi Pico together with the big 2.42" OLED SPI Display SSD1309 wit U8G2 Lib
Project Owner Contributor

Raspberry Pi Pico featuring MEGA game compilation

roger-rabbitRoger Rabbit

1.2k
16
1
12
new powerfull 3D-printed linear servo using jig and fader for positioning. up to 5" of stroke and 10 Newton @6V
Project Owner Contributor

3D-Printed Linear Servo Maxiimo

roger-rabbitRoger Rabbit

1.5k
17
0
6
New concept for a low budged linear servo made out of standard and 3D-printed parts.
Project Owner Contributor

3D-Printed DIY Linear Servo

roger-rabbitRoger Rabbit

699
6
3
3
3D-printed linear servo with amazing stroke length of about 165 mm achieved by a bendable but still sturdy band of metal completely D.I.Y.
Project Owner Contributor

3D-Printed D.I.Y. Linear Servo Big Owl

roger-rabbitRoger Rabbit

View all 9 projects

13.1k
131
34
176
IT IS NOT ONLY GAME, IT IS NEW DEVELOPMENT INTERFACE. CPU ( attiny85, atmega328 or samd21 ) on fake micro sd card :)
Project Owner Contributor

μRetro game console with CPU on fake μSD cards

bobriciusbobricius

1.6k
20
1
16
Use servos, alu profile, timing belt and 608 bearings to make one.
Project Owner Contributor

Cheap Linear Actuator

simon-merrettSimon Merrett

Things I've Built

Maxiimo

new type of 3D-printed DIY linear servo actuator, twice a stroke length of 65 mm or more https://youtu.be/r5D0ABQUuEs

Wolly - work in progress

wolly shall be an autonomously moving robot - moving like a worm (peristaltic movement) - the idea is to make a whole new thing out of simple componens just by putting them together in the right manner and make them collaborate

68.2k
592
7
76
Compact, ESP8266 based, battery powered, multi target De-Auth attack implementation.
Project Owner Contributor

Weekend on the Dark Side

rand-druidRand Druid

56.6k
539
43
405
Experience freedom of communication without borders, operators, networks, fees !!! Create your own network, your own rules !!!
Project Owner Contributor

ARMACHAT - Doomsday wireless QWERTY communicator

bobriciusbobricius

13.1k
131
34
176
IT IS NOT ONLY GAME, IT IS NEW DEVELOPMENT INTERFACE. CPU ( attiny85, atmega328 or samd21 ) on fake micro sd card :)
Project Owner Contributor

μRetro game console with CPU on fake μSD cards

bobriciusbobricius

12.6k
503
88
140
Hackaday Europe SuperCon // Belgrade, Serbia // April 9 2016
Project Owner Contributor

Hackaday | Belgrade

aleksandar-bradicAleksandar Bradic

11.9k
748
6
36
An ultrasonic interferometer is assembled from optical drive components, 3d-printed parts and an ultrasonic range-finder.
Project Owner Contributor

Standing waves of sound

andrew-fergusonAndrew Ferguson

10.1k
81
5
49
Building a tabletop injection molding machine.
Project Owner Contributor

Micro Injection Molding Machine

jupdykejupdyke

8.5k
44
5
37
Driving and use the ИГГ1-64x64M. High voltage vacuum dot-matrix display made in Ukraine in the 80's by Gazotron
Project Owner Contributor

ИГГ1-64x64M Adventure

muthMuth

8k
295
0
26
A solar-powered, Raspberry Pi-like Board idea that runs on 5mW
Project Owner Contributor

The Open Source Autarkic Motherboard

giovanniGiovanni

7.2k
4.1k
0
14
uGFX was written for use with makefiles. Using it in arduino is possible with minimal effort, though. Here's how.
Project Owner Contributor

using uGFX in Arduino

christophChristoph

7k
85
5
59
World first Raspberry RP2040 PICO - QWERTY & IPS devkit
Project Owner Contributor

PICOmputer

bobriciusbobricius

6.9k
692
9
11
A delta 3d printer, using 2020 vslot extrusion
Project Owner Contributor

Kossel Xl

ttnTTN

4.1k
132
5
24
Control volume, brightness, temperature, and more with a single knob.
Project Owner Contributor

Knobbox: Modal USB knob

sprospro

3.8k
40
4
36
Exactly as the title says I made a custom Arduboy board that can more or less drop into a VMU shell
Project Owner Contributor

Arduboy in a Dreamcast VMU

sjm4306sjm4306

1.6k
20
1
16
Use servos, alu profile, timing belt and 608 bearings to make one.
Project Owner Contributor

Cheap Linear Actuator

simon-merrettSimon Merrett

1.2k
12
0
15
My HBC-56 - a retro 65C02/TMS9918A/AY-3-8910 homebrew computer fully emulated on a single Raspberry Pi Pico
Project Owner Contributor

PICO-56: 65C02 + TMS9918A on a Pi Pico

troy-schrapelTroy Schrapel

732
11
2
12
Space Invaders is a 1978 arcade game created by Tomohiro Nishikado.
Project Owner Contributor

Arduino Space Invaders Game on 8x8 Homemade Matrix

mircemkmircemk

723
4
4
6
A programmable mechanical keyboard, made with black walnut and yellow rosewood
Project Owner Contributor

Carpenter Tau Keyboard

bo-yaoBo Yao

527
9
4
14
How to design and print small buttons for a portable console based on Arduino called Arduboy
Project Owner Contributor

Printable buttons for tactile domes

eriederied

View all

Share this profile

Share

Bits

Giovanni wrote 11/22/2023 at 18:09 • point

Thanks for following my project!

  Are you sure? yes | no

Send a private message to Roger Rabbit

Become cool instantly

Create your Hackaday.io profile like Roger Rabbit and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Report user as inappropriate

You are about to report the user "Roger Rabbit", please tell us the reason.