0%

0%

x-labz

Information system designer - WEB developer - Hardware design engineer

EU

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 03/12/2015.

My Projects

The 2015 Hackaday Prize

wearable UV Index & weather sensor

UV-badge

The 2017 Hackaday Prize

Full featured thermal camera, smaller than a credit card.

Pocket thermal camera

The 2017 Hackaday Prize

LiPo Power supply for LEGO Power Functions

LiPo Power Brick

Battery powered, internet connected weather station

E-ink weather station (pumpkin edition)

ESP8266 based humidity logging and adaptive fan control, door lock detector, and more...

Smart Home in the IoT Way

Small, simple SAM G55 development board with extra functions

Atmel SAM G55 development board

View all 7 projects

Projects I Like & Follow

The 2018 Hackaday Prize

A tiny, low-cost, and scalable device for sub-millimetric 3D positioning.

HiveTracker

The 2017 Hackaday Prize

A USB-flash sized GSM/GPS tracker with a wide array of features

USB TinyTracker

In the 1980's, you had to know programming to use computers. They were used for... guess what? Computing! Want to see how it looked?

Badge for Hackaday Conference 2018 in Belgrade

voja-antonic Voja Antonic

Run classic video games on your RC2014

Game Boards for RC2014

jb-langston J.B. Langston

Aloidia is a staggered, split, fully wireless solar-powered mechanical keyboard with extremely long battery life.

Aloidia: wireless split solar powered keyboard

nguyen-vincent Nguyen Vincent

The 2017 Hackaday Prize

This is the obvious next step to the Fidget Spinner, and the last project involving one. I promise.

POV Fidget Spinner

sean-hodgins Sean Hodgins

Supplyframe DesignLab: 2022 Hackada…

World's thinnest fully standalone DIY computer - 2mm!!

ELLO LC1

2021 Hackaday Prize

Wireless device for measuring temperature, humidity and pressure with a e-paper display, with a weather forecast, batteries -operated

Mini weather station Efekta with e-paper display

andrew-lamchenko Andrew Lamchenko

ARM Cortex-M4F based retro inspired handheld game console.

1Bitsy 1UP

piotr-esden-tempski Piotr Esden-Tempski

Just a simple compact tetris clone using an ATTINY85 and a cheap OLED display.

pockeTETRIS

dombeef dombeef

A pocket demon named Exy. Luci? Haven't heard about him.

Xling

e-ink, BLE enabled 'smart' watch with PCB wristband

Schmartwatch

A tiny Raspberry Linux computer with a keyboard, a daylight-readable screen, and a long-range transceiver

ShaRPIKeebo - Nano Linux Computer

Stylish wall mounted battery powered 7.5" E-paper display, showing fermentation progress of beer.

E paper display beer fermenting monitor

Supplyframe DesignLab: 2023 Hackada…

Open-Source RC Snowplow that can remove snow from your driveway or sidewalks and can be customized for other tasks around your home.

SNOWBYTE

The Stat Tracker is a portable battery powered device that keeps track of health, energy, and dashes for the HLD Table Top RPG.

Hyper Light Drifter Stat Tracker

albert-phan Albert Phan

256-channel data acquisition system (DAS) to provide a bio-potential reading in the 0.4Hz-500kHz frequency range using a flat panel detector

Bio Balance Detector

andras-f Andras F

An attempt at building a stylish, low-power calendar, thanks to the ESP32 and an e-paper display that (for now) resembles a framed picture

Low-Power E-Paper Calendar

View all

Bits

Radu Motisan wrote 07/15/2016 at 13:09

Hi mate, it was nice to get a notification from you. How are things going, what are you working on?

Are you sure? yes | no

x-labz wrote 07/16/2016 at 15:03

hi Radu, I'll publish my new ESP8266 based IoT project soon! Stay tuned! 😉

Are you sure? yes | no

Patrick Van Oosterwijck wrote 10/26/2015 at 16:07

Thanks for the skull for my LiFePO4wered/9.6V project! :)

Are you sure? yes | no