Thinking up new ways to make life difficult for myself...
This user joined on 05/25/2016.
Cool/interesting legged robots
Curated by Paul Crouch
Miguel Ayuso Parrilla
Create an account to leave a comment.
Already have an account?
Thanks for following my project https://hackaday.io/project/172233-energy-and-water-mushroom
Are you sure? yes | no
Thank you for the Like of the #FilaMecanum project!
Thanks for following Open Source LiDAR - Unruly. Please tell all your friends about it and let's make the world a better place ;-)
P.S. - I love your Droidbot 07 project. Never, never, never give up!
Thank you for like to my project https://hackaday.io/project/86940-snowplow-robot
Thankyou for the follow, be sure to skull anything you like :)https://hackaday.io/project/159520-p-cell-urea-electrical-power-harvesting-device
Thankyou for the follow, be sure to skull anything you like :)https://hackaday.io/project/159547-cyborg-360-ar-hud-motorcycle-helmet
Thanks for following my project Wheeled Walker Hybrid Bot!
in pmm please review my license ;)
https://hackaday.io/project/29190 what about a stator cylinder "lane" and a rotor "vehicule" rotating around the stator ? do you have a small m² to test it ? i will buy materials for you if ok
That's a pretty cool project (followed) but not sure how I could apply it to my bot.
as is sure but if i'm right on rotor with it : an electricity generator, a high speed rotor to fly, a water wheel, a good starter to my pmm
i will tag pmm as "robot's heart'
Hey Paul, thanks for the like on #Bluetooth & WiFi Antenna Upgrade :-)
Bit of a surprise that one lol, much appreciated :-)
Thanks for the follow, great to see you like the #Robo-Dog ! Here's a video that I made about it:
Hi Paul, thanks for taking an interest in my #The Bodyfield Experiment
I've been confusing non-hackers with it on and off for years, finally decided to release it in totalis and see what everyone else makes of it. :-)
It’s very intriguing, wish I had more time to investigate this too!
I hope you find something useful among my rather eclectic projects, thanks for all the follows and skulls. :-D
Hey, thanks so much for following my project https://hackaday.io/project/19643-voight-kampff-machine , my initial focus is getting the mechanical parts out of the way, then on to the hard stuff.
01001011 01100101 01100101 01110000 00100000 01110101 01110000 00100000 01110100 01101000 01100101 00100000 01100111 01101111 01101111 01100100 00100000 01110111 01101111 01110010 01101011 00101100 00100000 01101100 01101111 01101111 01101011 01101001 01101110 01100111 00100000 01100110 01101111 01110010 01110111 01100001 01110010 01100100 00100000 01110100 01101111 00100000 01101101 01101111 01110010 01100101 00100001
01001001 00100111 01101100 01101100 00100000 01100010 01100101 00100000 01110000 01110101 01110100 01110100 01101001 01101110 01100111 00100000 01110101 01110000 00100000 01110011 01101111 01101101 01100101 00100000 01110101 01110000 01100100 01100001 01110100 01100101 01110011 00100000 01110011 01101111 01101111 01101110 00101100 00100000 01110100 01101000 01100101 00100000 01100110 01101100 01110101 00100000 01110011 01101100 01101111 01110111 01100101 01100100 00100000 01101101 01100101 00100000 01100100 01101111 01110111 01101110 00100000 00111011 00101000
Paul, thanks for following the uRADMonitor project, the environmental monitoring network covering now, the entire planet. If you want to support the development (but also help with the Igg campaign), you can purchase one of the available detectors on https://www.indiegogo.com/projects/uradmonitor
Just to give you an example, the solderable KIT1 for instance was very well received by the Makers community, and there is also an ongoing competition on http://www.uradmonitor.com/topic/soldering-the-kit1/ . It's an amazing IoT product, doing 24/7 surveillance of your background radiation levels, can be used as a portable dosimeter, but it is also fun to solder.Thanks again, Radu
Create your Hackaday.io profile like Paul Crouch and many others
© 2021 Hackaday
You are about to report the user "Paul Crouch", please tell us the reason.