0%

0%

TechSpiderbot

I design in SolidWorks and program embedded C++ and windows based C#

Netherlands

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 06/18/2018.

My Projects

A Medium cost, open-source, 3D printed, quadruped robot platform for researching and fun

MrkII TechSpider

#pcb capacitive sensor

@CUBE

quadruped robot

MrkI Turltle

RC controlled ball robot with FPV camera

Ball Robot

Projects I Like & Follow

Design, development and build of an open-sourced SLS 3D Printer suitable for hobby users.

SLS4All - Affordable SLS 3D Printer

tomas-starek Tomas Starek

The 2017 Hackaday Prize

3D printable, Open Source Hardware, tripod kinematics, cable driven 3D printer

Arcus-3D-C1 - Cable 3D printer

daren-schwenke Daren Schwenke

2021 Hackaday Prize

Your 3D content on a real PoV volumetric display, no glasses needed!

VVD: an open source Real 3D Volumetric Display

madaeon Madaeon

The 2018 Hackaday Prize

A hardware kit to experiment with inflatable and vacuum based soft robotics.

Programmable Air

amitabh-shrivastava Amitabh Shrivastava

2021 Hackaday Prize

This watch has 200 leds and an ESP32 pico for superb light shows

The 603-200 watch

If it can output VGA, it can be turned into ASCII art.

Realtime VGA ASCII Art Converter

wenting-zhang Wenting Zhang

The 2018 Hackaday Prize

This project will give you full gesture control of any virtual Hero you like with a simple set of inexpensive devices using sensors on RPi

Immersive VR on Rpi to control a Hero with sensors

jeanperardel jean.perardel

Earring with 16 addressable LEDs (WS2812B-2020) and rechargeable coin cell battery.

WS2812B (Neopixel) Earring

IoT Fidget Spinner with Bluetooth Low Energy and POV LED Display

Spinduino

uri-shaked Uri Shaked

The 2018 Hackaday Prize

An ecosystem of Eurorack modules that enable users to make studio quality MIDI/CV controls, audio interfaces and synths

MAD 1.1 - Modular Audio Devices

michele-perla Michele Perla

The 2017 Hackaday Prize

IoT solution to control the interior of a stretch limousine

ESP8266 controlled stretch limousine

The 2018 Hackaday Prize

Model and 3D print a mold to create a silicone rubber "skin" lattice for an easy to make custom prosthetic hand that matches your 3D scan

3D Scan to Custom Soft Prosthetic Hand

curt-white Curt White

Printing a Jesus nut for an RC helicopter

3D fix a helicopter

marius-taciuc Marius Taciuc

Raspberry PI waiting for a signal from PIR sensors and sending emails with pictures taken by cameras. RFID reader to easily disarm ii

Home security with Raspberry PI and cameras

The 2017 Hackaday Prize

Black box for trucks. Log GPS position, speed, 3D accelerometer/gyro, temperature, wind speed/direction, CANBUS data to SD card. Radio COMS

Black box data logger for heavy vehicles/trucks

bert-van-den-berg Bert van den Berg

Candles are great, cozy and natural an and all, but I figured every once in a while you may want blue light next time the power grid fails.

Candle Powered Led

A shoulder mounted soft robotics air puppet that uses beat detection and forward/reverse fans to dance the night away.

Soft Robotics Ducted Dancer

curt-white Curt White

Tools and Materials Required Arduino Uno + Protoshield Module RTC Tactile Switch (tombol) DFPlayer mode Cable jumper Speaker

smart clock talking

View all

Bits