0%

0%

Lukas

-

Germany

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 01/12/2020.

Projects I Like & Follow

The 2018 Hackaday Prize

A high speed and high torque robotic actuator using low-cost brushless motors, custom controller, 3D printed parts and bearings.

3D Printed Robot Actuator

paul-gould Paul Gould

The 2018 Hackaday Prize

A smaller and cheaper open source brushless motor

PCB Motor

carl-bugeja Carl Bugeja

Hackaday Prize 2019

A low-cost, high-performance bipedal walking robot

Blackbird Bipedal Robot

Hackaday Prize 2019

Run Marlin & Octoprint on Raspberry Pi directly

64-bit 3D printer,Run marlin on RaspberryPi

ESP-32 WROOM-32D has Three phase Centre Aligned MC-PWM, Dual SPI, I2C, 2MHz ADC, UART and CAN. Enough for a controller.

ESP-32 BLDC Robot Actuator Controller

paul-gould Paul Gould

learn how to overclock your Raspberry Pi device in a safe and efficient ways for reaching any goal!

Boost your Raspberry Pi in Minutes

A better-than-servo motor for robotics

Custom motor for robotics

Hackaday Prize 2019

Ardunio-Compatible M0/Zero/SAMD21 with FET Driver, MOSFETs, Absolute Magnetic Encoder, USB and RS485 comms. ~$US50

Brushless Actuator (Arduino-Compatible)

paul-gould Paul Gould

good looking and clever 4-legged robot

Dizzy Wolf

The 2018 Hackaday Prize

printed - using only PETg, no flex filament needed integrated NEMA17 stepper motor only three small parts for tolerance compensation

3D Printed Strain Wave Gear

johannes-hassler Johannes Hassler

A general purpose robot joint using a cycloidal gearbox and an ODrive modified to support active compliance

3D Printed Robot Joint with Active Compliance

tim-wilkinson Tim Wilkinson

I rebuilt my Passap E6000 knitting machine so that I can now control not only the front but also the rear needle bed.

Passap E6000 rebuilt and replaced console

irene-wolf Irene Wolf

A high torque, high precision, Strain Wave Gear (harmonic drive) based 3D printable closed loop servo actuator for use in robotic arms

Open HD

sam-armstrong Sam Armstrong

A 3D printed stereotax

3D printed rodent stereotaxic device

lex-kravitz Lex Kravitz

Brushless driven four leg quadruped

BLDC Walker

peter-wasilewski Peter Wasilewski

A mid-size quadruped made with off-the-shelf + 3d printed parts.

Dante

Building a brushless quadruped for under $1000

My Journey of Building a Performance Quadruped

peter-buckley Peter Buckley

Cheap and DIY alternative to commercial security keys such as Yubikey using ST-Link V2 clone dongle

ST-Link V2 clone Security Key

matias-n Matias N.

View all

Bits