0%

0%

Gholamreza Izadpanah

Architure + Cvil + Electronic Engineering

Italy

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 07/24/2022.

My Projects

Supplyframe DesignLab: 2022 Hackada…

It uses gray water and leads it to the flash tank to save purified water to pump into the toilet bowl.

Toilet Water Optimizer

Gholamreza Izadpanah

Projects I Like & Follow

The 2018 Hackaday Prize

! a platform for sensing and indicating human arousal !

SHE BON

The 2016 Hackaday Prize

how you can make this cool looking radar using the Arduino Board and the Processing Development Environment

Make a Radar Station with Arduino and Processing

A general purpose robot joint using a cycloidal gearbox and an ODrive modified to support active compliance

3D Printed Robot Joint with Active Compliance

An open source HW & SW motor controller for fine-grained control of brushless DC motors for robotics.

SmoothControl

Matching the performance of an overmolded strain relief using 3D printing and flexible filaments

3D Printed "Molded" Strain Relief

iRobot Roomba 690 enhanced with a Raspberry Pi Zero 2W and IMU.

Roomba RPi

The 2017 Hackaday Prize

MFRC522 RFID on ESP8266 featuring WebSocket, JSON, NTP Client, Javascript , SPIFFS

ESP RFID

Add Bluetooth speed output to treadmill. Arduino on ESP32 and Treadmill Speed sensor. Zwift compatible with realtime Webpage stats.

Add Bluetooth to Treadmill

Hackaday Prize 2019

Convert FPV racing drone into an interceptor using Raspberry Pi

Open Source Air Defense

Reduce/Eliminate Elephants Foot from 3d printed parts

REEF method for 3d resin printing

Hörmann is the brand of the garage door and they have extra remotes but they are, to be fair, a bit pricey for my taste.

Hörmann Garage Door Remote Hack

A Sci-Fi 3D Printed Winter Soldier Mask With Transparent Displays.

Sci-Fi 3D Printed Mask With Transparent Display

2021 Hackaday Prize

5 Axis articulated robotic arm. Actuated by planetary reduced open-loop stepper motors.

PROJECT-A

MicroPython powered 3D printed drawing robot

TurtlePlotBot v3

Control and animate a RGB LED-Strip with any IR remote control.

RGB LED-Strip, controlled by IR remote control

Take an old router, configure OpenWRT and add a webcam. You now have an internet connected camera you control.

TP Link WR703N simple remote camera

Benjamin Blundell

Using a Bosch BME680, this project reports Temp, Humidity, Pressure and Air Quality in Grafana.

Long-Range IOT Environment Sensor

GatePi - Based on Semtech's SX1262/SX1268 with Raspberry Pi RP2040, 4- Channel Relay with LoRa Module based on RP2040

Home Automation with GatePi

kamaluddin Khan

View all

Bits